HOW TO PERFORM A PROPER AND ACCURATE RADON TEST

preview_player
Показать описание
HOW TO PERFORM A PROPER AND ACCURATE RADON TEST

A simple and inexpensive radon test can be performed by Traverse City Home Inspections to determine if you have an elevated radon level in your home and if a relatively simple, but needed, mitigation procedure is in order.

We conduct the test in the lowest livable area of your house that is regularly used 8 to 10 hours per week. Short-term tests are useful to see if further testing is warranted. Most are activated charcoal-based or electret ions that measure radon levels for two to seven days. We mail the tests to a lab for the results.

In this video we will be talking about:

1. What type of device is being used to record the test results

2. How is that device used inside the property?

Need Home Inspections? Call us today at (231) 499-3256.

Don't forget to like, share and subscribe to our channel for more updates.
Рекомендации по теме
Комментарии
Автор

I used a First Alert radon test kit for 5 days to evaluate the radon in my home. I am now awaiting results and carefully followed the instructions that First Alert provided when i ran the test.

whocares
Автор

Is two days or 4 days the recommended testing time frame from a realtor?

jayd
Автор

I’m sure nuclear power plants have a monitoring program for their employees. I understand that they have exposure mainly from gamma and beta but I would look at their monitoring programs

creetpollock
Автор

Honestly a rating for a house should probably be more of an index based on several different measurements than decay measured at a point imo

creetpollock
Автор

What source strength and volume of air do you use for calibration? Could you use a compressor and express concentration in terms of flow rate so u could get a more homogenous reading to compare to other homes?

creetpollock
Автор

I have a 3200+ sq ft rancher with a finished basement.
I purchased this home with a mitigation system in a far corner of a basement
Is one mitigation system enough for our whole home?

I have the AirThings Corentium Radon detector and I’m going to test 48 hr averages in multiple areas (different sides) of our home. Upstairs and downstairs

MsSparkle
Автор

Or use a hyperbaric chamber to calibrate patient monitor with air monitor ?

creetpollock
Автор

I think concentration would mainly depend on elevation and air flow so u should take readings at 3 different elevations maybe?

creetpollock
Автор

I think that being transparent and honest with people is more meaningful than being certified. This isn’t a ‘trade’. More of a cottage industry imo.

creetpollock
Автор

Wouldn’t a basement with a washer and dryer in it be considered a livable space. Even if it have a boiler/ furnace in it.

ralphdeleon
Автор

Someone working at a mine might be be inhaling more alpha particles than a person with a fixed income so u should have to prove that they are atleast approved that before u recommend mitigation.

creetpollock
Автор

How do you prevent it from being stolen

jaytab
Автор

You're not going to get a useful radon test from 2 days or even 7 days. You need at least a 1 year test.

martinlutherkingjr.