🔥 Downhill Open Root 6010 with UNEVEN FITUP

Показать описание

We were actually going to do a video on 8024-P2 today, but when we prepped the plate to do it we had a terrible fit. The plate was bent, so we had a nice tight gap on the ends, but the middle opened up quite a bit. Instead of scrapping it, we decided it was a great opportunity to show everyone what happens in real life and how to deal with it.

In this video we will be running downhill 6010 electrode to burn in the root. Once the opening starts to get too wide for our original stick, we will step it up in electrode diameter and amperage to fill that additional gap. Once we get back to a tight fit, we'll go back to a smaller electrode and lower our amps.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
VIDEO SCHEDULE:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► MIG Monday: New Videos every Monday!
► TIG Time: New Videos every Friday!

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EQUIPMENT WE USE:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

► ESAB Power Sources: www.ESAB.com

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
JOIN US ON:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ #welddotcom

Рекомендации по теме

Комментарии

Hi Bob,
When I was going to welding school in 1981 my instructors told us many times that when we get jobs in the field, the equipment will be crap, the fits will be crap, the conditions will be crap and we will have to be good enough welders to overcome all these obstacles. They were absolutely correct, I've heard the job Forman tell complaining welders "if you can't hack it, pack it" many times since then.

SamC

“Those who can do, and those who can’t, teach”.
You, Mr. Moffitt, are most definitely an EXCEPTION to that rule!!!

markashlock

Love watching you burning rods. What a master. When I'm running rods I am always thinking about how you might be doing it in one of these videos. Really pushes me to go beyond just getting it done. Thanks again for another great video!

sparkywelder

Thank you for the crystal clear arc shots. It's like we were under the hood with you.

Gavreeli

I like these weird fit up videos. Very educational. Great job👍👍

Ironman-ellr

Camera and arc shots looked
Amazing on this
Video, nice job!!

patriot

This is a valuable lesson. The arc shot is tight enough to see the appropriate technique.

kevinhornbuckle

Good stuff, Mr. Moffatt!! I actually proved to a guy you can determine the weld process and electrode for SMAW just by the smell. Did a blindfolded test and picked out the MiG, TiG and Stick process. Even told him when he had a cellulose rod and a low-hydrogen rod.

sixstringslaya

The new camera or lens is awesome on the arc shots! Crystal clear! Best in the business.👍Bob looks better with the old camera though. This one makes him look like Ebeneezer Scrooge.

tomchristopher