Stick Welding 3G Uphill 6010 Open-Root #shorts

[Vprclud]

Instructions unclear, now I have 18 Thanks a lot.

[garrimic]

As soon as he says “You never want to pull out” I knew the comment section was going to be lit.

[jboy]

Not Pulling out is why I'm learning how to weld now!!

[CasualWarden]

Never pull out, assert your dominance.

[andrewmckeown]

Nice tight arc and maintaining the electrode angle all the way up, text book weld. Listen to that crackle as the arc is pushing through.

[SeanLawn]

Honestly on here for the sick welding. Teaching myself to weld on a Lincoln 90i. As soon as he said pull out though?? My eyes darted to the amount of comments on a sweet welding video. I knew there would be some witty banter. Thank you my fellow weld nerds for not disappointing me.

[nikkilovetheyardsale-again]

The break down in his voice explains how easy this is for him 😂

[marshallcalder]

Cool info clip ! Pulling out was the method we were introduced with for 3G during apprenticeships .Took me years and years to discover that wasn't correct method for anything more than 8 mm material thickness. Even remember seeing on some Info-graphics from top end manufacturers of consumables where there was no reference to pullout - the (root) problem behind porosity, fisheyes, slag inclusions and the like - certainly a No -No with flaw detection!
Whatever we've learnt there will be room for refinement

[Hitman-dsei]

I like that wet spot and not having to pull out too !

[redlock]

Been trying this method out, but not quite getting it right.

Definitely better than what i did before.

Some of the problems i get is burn through (amperage too high) and massive roots.
Another problem is that it fills when i move up to remove material.

Overall i get a pretty uneven root and weld. Need more practice

[kylenewman]

Soooo deeeown up deeeown rip dem walls and touch tha puddle is and what you don't want ta deeewww is pull out.

[edharm]

Wipe & Pause, backing to the puddle chills the puddle and aids in controlling the keyhole.

[TheDanson]

Very new to welding. I tried this with my Mig welder. It works really well!

[timstone]

This is for celulosic root welding. For low hydrogen it's a lot less movement but greater arc length control. 😊

[dakotawymer]

This'll be the first guy I've ever heard call whip and pause method a "stitch"

[Nick-xcfy]

6010 is the only rod im aware of where you can use the stitch method when stick welding. Any other rod and you'd drag fpux back into your weld.

[grabisiyaoymagia]

Wow Ang galing Ng Pag ka instructions ne sir

[Cloud-ee]

I’ve been told to never let your puddle be in front of your rod is that true?

[QasemInfrmation]

Question Mr this it is root welding????
I from Iraq stuodent

[ispianist]

Thats what my girlfriend said "dont pull out" now i am stuck with childsupport payments. 😅