How to Fix a Running Toilet w/ Complete Fill Valve Replacement - DIY

preview_player
Показать описание
Today I show you how to fix a running toilet, what things to check, etc. and end up with an entire DIY tutorial on how to replace your fill valve assembly. It's an easy DIY that anyone can do! Save some money! Let me know if you have any questions. Thanks for watching and don't forget to Like and Subscribe!
Рекомендации по теме
Комментарии
Автор

This just turned into a bigger job than I anticipated. I just wanted my overflow to stop flowing.

grandmaraps
Автор

You are really good at explaining things in a fun way & creating videos to go with. Much appreciated!

kendra_liester
Автор

Saved me from calling my maintenance people and having to wait all day for them to simply turn a screw. Thank you so much!!!!

lgonzal
Автор

Very good information, i like the way you explain things, i have exactly the same problem with my toilet, i think i have to replace the whole assembly inside

roccocolangelo
Автор

Very informative and good tips. Thanks for this.

digger
Автор

Thank you. That fixed it. You had the same configuration in your toilet as I had.

Itsme-jvcd
Автор

Thanks so much appreciative the advice

dianeuerata
Автор

I really enjoyed the humorous video inserts during your presentation🤣

wessnyder
Автор

Great video and it showed exactly what needed to be done. I have a project next week because that is the same problem. Funny when I adjusted the pressure of whole house water pressure at the main it effected the toilets.

wagonwheeldc
Автор

my problem was solved with the clockwise screwdriver. thanks!

ArronP
Автор

How about how to just clean out or replace the refill valve seal in this kind of toilet? They say when thats clogged it will keep making the hissing sound. Do you unscrew the cap on the vavle the same way you do on newer models? They just pull it up and twist it. I see youve got the exact same kind of old vavle cap i have with the 3 screws. I dont know if i can just do the same so i can clean that out. Or do I need to unscrew the 3 screws. Can you show how to clean out or replace the seal?

xou
Автор

wow, we just got a full measure of fixing the running toilet issue.. not a little snippet as many others do.

booban
Автор

That purple screw on the fill valve at the beginning, how big is it? I'm trying to determine if mine is snapped in half or something, because it pops out and in really easily like it's not attatched to anything, thread wise. It's about a half inch in length, maybe smaller. I can turn it right or left and it doesn't accomplish anything, like it's stripped, but it isn't. It just kinda sits in there and wiggles. I'm trying to get it to catch threading by pushing firmly as I try and engage it with thread, but nothing happens. One thing tho, when I do push down on it a bit, the water stops. But when I release, water begins to flow. Headache!

mrlozano
Автор

How do one adjust the valve from 10in to 14in?

MAscoutsquad
Автор

but what are the names of the parts? and can you replace the old ball float with the vertical float?

jakmere
Автор

What is the other screw for beside the purple screw?

kelbear
Автор

Got a brand new toilet. Had it 3 months and it runs. It will turn off if I lift the bulb. Same problem. I'm so frustrated.

VickyGoss
Автор

So, tomorrow I have to go to Home Depot or Lowes to buy a new valve unit.
HOWEVER, what's in our tank right now is almost exactly like the "new" one he installed.
That danged thing has been nothing but a pain in the butt!

We do have hard water here, so I suspect that the problems it has are due to a buildup of gunk inside it.

I can't even turn it to adjust it anymore unless I put a lot of pressure on it.
Then, after I adjust the stupid thing, it works for a day or two and I have to hit it to make it work (start or stop).

So, I'm going back to the old school type, like the old one he had there.
At least, those are easier to adjust and might last longer.

But, I'm going to be prepared for the future.
I'm buying a MOEN one and the repair kit at the same time. Best to be ready!

BlondieSL
Автор

For mine That white one is broken, it’s too old apartament

thankYouN
Автор

I have turned the screw ALL the way and it still won't stop running..

rcdyer