Kwikset Powerbolt® 250 Electronic Door Lock Installation Video

The Kwikset Powerbolt® 250 Electronic Door Lock, available in a transitional design, is an
easy and attainable way to upgrade to an electronic door lock. It offers convenient keyless
entry that makes coming and going secure and simple. Customize up to 25 user codes and
enjoy easy code access with the 10-button light-up keypad. Additional features include Auto
Lock and Vacation Mode, which provide security and peace of mind. All you need is a
screwdriver to install it.

[RaeBae]

This man is incredible. I haven't bought a lock yet but I may buy a Kwik set just because of him

[goldenfrog]

I wanted a quick guide on how to install the Kwikset, I did not expect this man to give me a smile this gloomy morning.
Please make more guides my man!

[ronniemo_]

The method and use of gentle humor is well done.

Attempting the install after a review of the video. I will update with whether or not our nice surfer/installer lied. 😁

[cherylabbe]

The clearest and best presented step-by-step instructions available. Also, entertaining. Thank you!

[curiousorange]

My man! You saved the day and I appreciate your humor 🙏

[donnayap]

My husband and I finally got it to work. Following instructions to factory reset step 16, then 15, then 6 worked to get the code set. But the latch would not open when using only code .. it would only open using code if the key was inserted (weird) ..
.. So we started all over and
reinstalled…checked that the latch was centered and that the flat blade hole was horizontal... Reinstalled the mounting plate and made sure screws where not too tight... also, made sure the latch assembly was cleaned of any wood debris which ours had a few very small pieces inside the latch assembly... after reinstalling the batteries we did not have to reset the code that we set earlier and the latch is finally working perfectly without the key having to be in the lock. Took our two (tiny) brains and all the helpful comments on this post to be successful. Thank you everyone for your help!! 😅

[EazzyBeezie]

This guy is my hero. I wanna see him install more locks

[alyssajchase]

He’s amazing! Thank you for talking me through ❤

[camillecreque]

Awesome video, thanks for saving me $150 on a locksmith!

[sugarmedic]

When dial turned to right it clicked up but did not appear to have positive traction and appeared loose. Would not lock door with electric function. Key works perfect and very smooth. This is my second unit. I will return it as well unless kwikset has a recommendation. This is a right side lock

[ld]

With key in the lock-code can be programmed. Key cannot be removed unless latch is extended. Pull key out, code cannot be programmed. What did we do wrong?

[dinarobinson]

I installed this lock last week before I went out of town. I come home and my code worked after I entered it several times. I locked my door this morning this evening my code does not work I’ve tried over and over again. I can not get inside and the keys are locked inside. What do I do?

[sharnellejones]

Great video! He should have noted the deadbolt has an arrow that points up. Took me an hour to figure that part out.

[davidmcneely]

Ok.. everything for me was great until minute 2:18! The "bolt" was still protruding (locked position) and you were going to give the "ring" away. Then at 2:19 you are on the other side of the door ready to show us how to install the inside piece...but...now the bolt is no longer protruding and in the unlocked position!!! How did it get there??? Is it alright to use the key to set it to this position before installing the electronic piece??

[tank]

The keys work great. Unfortunately when I try to put in a code it only locks halfway and then fails. Any suggestions? Thanks

[laurahash]

My new lock won't set a code. It flashes red after trying to set the code. I've followed all instructions to the "t". I even factory reset just in case, but it still won't work. Any advice?

[manmachinam]

After 3 hours of installing and re-installing, still not having any luck. I've followed ever single step carefully, made sure everything is perfectly aligned and the bolt moves freely. But the thing still won't program. At one point, I had the code working but it was the opposite of what it should be. So I used the door rehanding code. That failed. So I did a factory reset and can't get past programming a code. Might be time to return it to the store. Ugh. So frustrating.

[marpay]

I'm grateful I came across this video🎉🎉🎉! You're funny & I think I might stop by for lunch since we're in the trusting mode😂! Btw, your video for step 6 does not show!

[rachiddreamer]

Thank you very much it helps alot ❤❤❤❤❤

[psycho_killer_]

With mine the little flat key that goes through the deadbolt in the center isn't connected and it won't twist do I have to just glue it in there or how do I get it to stay