FIX a Running Toilet (Canister Flush Style)

FIX a Running Toilet (Canister Flush Style)

In this step-by-step guide, we'll delve deeper into the world of canister-style flush valves. I'll walk you through the process, ensuring you have all the knowledge you need to take on this common household plumbing problem. By the end of this video, I guarantee you'll be able to fix a running toilet featuring this unique mechanism!

Whether you're a DIY enthusiast or a professional plumber, this video will arm you with the essential skills and knowledge to conquer this issue.

________________________________________________________________________________________________

⏰ Chapters:
Intro ▶️ 00:00
Turn off water ▶️ 00:10
Flush the toilet ▶️ 01:05
Unhook the canister and check for cracks/leaks ▶️ 01:10
Replace canister washer ▶️ 01:30
Reinstall canister ▶️ 02:03
Check the fill valve ▶️ 03:10
Rebuild the diaphragm valve ▶️ 04:00
Turn on the water to see if the problem is fixed ▶️ 05:00
Replace the fill valve ▶️ 05:15
Adjust float level ▶️ 06:32
________________________________________________________________________________________________
________________________________________________________________________________________________

🔴 Links:
________________________________________________________________________________________________

Thanks for watching! I'm Roger Wakefield, The Expert Plumber, and welcome to my channel. On this channel, it's ALL about plumbing. We play games, we experiment, and we have FUN here, talking and learning about all things plumbing!
____________________________________________________________________________

*NOTE: This description contains affiliate links that allow you to find the items mentioned in this video and support the channel at NO COST TO YOU. While this channel may earn minimal sums when the viewer uses the links, the viewer is in NO WAY obligated to use these links. Thank you for your support!

[cameronclarke]

I just got accepted for my first plumbing apprenticeship, been watching your videos non-stop. Thank you!

[Jemmeh]

Thanks Roger. Spent $10 and fixed it myself in about 10 minutes. Saved me a lot of hassle!

[michaelribbins]

My issue was the fill valve. I saw 5 videos on how to replace it but this was the first showing how to take it apart and clean it. Thank you!

[nathanh.]

If everyone knew of Roger, the whole world would wanna be a plumber

[mikeeiffert]

Very helpful. Canister style drain is new to me. Didn't know I could unscrew to clean or replace gasket. Thank you.

[suzyhawkins]

Thank you so much for your video! I'm a single Mom & homeowner who tries to tackle repair jobs myself when possible. I had two issues, fill valve wouldn't stop filling after flushing, & when cutting the water off, all of the water would drain out of the back of the tank . After your video, I was able to fix both issues with replacing the diaphragm seal in the fill valve & the cannister flush valve seal.
It was very easy and cost me less than $10! THANKS!!!

[RonWadlinger]

Thank you so much for posting this video. I have very little plumbing knowledge and was nearing my wit’s end trying to fix my toilet. After watching this video, I was able to quickly and easily diagnose the issue (a faulty fill valve) and get it fixed. Much appreciated!

[zldr]

You just saved me $$ from having to replace two leaking toilets. Thank you!

[michaelj]

Hello sir,
Just wanted to say thank you for the video! This is my first time dealing with one of these canister style toilets. Per your recommendation, I checked the seal and it had an obvious tear in it. I replaced that for $8 and she seems good as new now, no more running! Appreciate the video!

[craiggeorge]

Thank you! Brand new toilet was "leaking" after a couple flushes Took apart the diaphragm, reassembled and now it's fine.

[tonyneville]

Your video was extremely helpful. Thank you. You took the “rocket” out of science 👍🏼

[donovanmorgan]

Thank you for the video sir. I could not have done the job without it!

[Arctisity]

Opened the back and it confused the heck out if me. Was able to fix it. Thanks!

[DownSouthSlots]

Thanks for all the help with knowledge

[jeffkessel]

Thanks Roger. My canister seems to close immediately after releasing the handle and I get a low volume flush. Is there an adjustment I am missing or does the unit need to be replaced?

[benkenobi]

Hey I have an union pipefitter interview tomorrow and I’m wondering what kind of questions do you think they will ask me ?

[WillFixThat]

I’ll have to make sure Matt watches this or else we need a plumber soon! I hear him tinkering with his bathroom toilet ! 😂

[HoraceGorman]

The base for the canister is my Kohler came out of the toilet. That is, when turning the canister instead of the upper portion releasing, the lower portion including the thick rubber ring came out. It appears that to replace that lower part, one has to press very hard while turning so that the tangs fit under the rubber ring holding against the bottom of the tank. Is that correct?

[markwittick]

I have the same Kohler canister mechanism. After a weeks worth of flushing the canister will have rotated 90 degrees clockwise and the chain will no longer be pulling straight up and will start to bind. Any ideas as to the solution? Thanks:)

[igenjenco]

I just installed one of these styles toilets but the floater is getting stuck at the bottom I have to tap the floater with my finger then it will work any input or advice