Toilet Fill Valve Replacement DIY Tutorial! #diy #toilet #plumber #plumbing #repair #bathroom

[johnbrzenksforearm]

I've been installing them for over 20 years. The only nut I tighten with a tool is the nut on the stop valve. I've seen these plastic nuts crack and flood homes so hand tighten and let the rubber do the work.

[austinofford]

This is a 5 star video, quick, to the point, step by step, no extra stories. the damn thing and done, thank you for this

[tandrew]

Fantastic job of not wasting minutes and minutes blurring away! Thank you comments for cautioning against using tools on plastic.

[OfficiallyUnofficialAlCooper]

I'm not a plumber even a little bit, but your video helped me get the job done. Thank you, sir, and keep up the great content and education efforts.

[MariaMedina-zmmf]

I thank u so much, this is the first time that I install a fluid master..I didn’t need NO tools 🧰 🛠️ you are allot of help..i do appreciate you and you posting this video to help others like me.. thank you once again...😊many blessings
❤️✌️😉❤️

[joesTired]

Turn off the supply valve, and then flush the toilet before taking out the old fill valve. Way less water will be in the toilets tank.

[supac]

Never use a pair of channel locks and a plastic supply line nut! And you will crack it and be in a world of trouble!

[rodgermetzger]

Hay smart guy make sure you adjust the height of the fluid master so it’s high enough to be able to flush toilet and don’t have too high if and whenever if the washer goes bad and it keeps running and water runs out of the whole of the trip lever

[bennyanthro]

Lifesaver video! Your insights + little common sense helped save the day! BONUS, wife is happy🤣

[Boothreviewbricks]

Great video ONLY thing I would say is after securing the water, flush the toilet so you don’t have to catch all the water in a bucket…

[ricklee]

You removed a fill valve with a brass shank It should be installed new with a brass shank and change the supply to a supply that has a brass nut to go up against the brass shank it's the best job you can do

[GritNGains]

Thanks for the super helpful video, I was able to replace my fill valve in just a few minutes 👍

[desireebryant]

I can’t believe this video came on tonight while my toilet is running. 😮👍🏾

[tlasjc]

I saw the bucket and recognized it from a Cape May Nj caramel corn maker. I use the same bucket for wire nuts.

[skylerstarratt]

If the toilet flap is not broken it’s easier to turn the water off and then just flush the toilet very minimal water but cheers bud what state are you in

[ahmadsumadi]

Disconnecting the water line is not easy! I wish these videos would say that! It’s not just one turn and you’re done.

[kellysledge]

Should've switch the top and left the brass shank.

[Antonio-gqfx]

I did a, house referb everything new with 22mm pipework and increased flow rate from the street.After a few months my tenant changed my new toilet system for one of these without permission. When I found out I changed it and put back to the origional and told them all I've done is open up the valve restriction on the toilet.

[thyearApprentice]

Just change it out from the top...tip from the 8TH year app.

[camcordernonsense]

"you can call yourself a plumber" hehehehe