How to Replace Motor Mount 2013 - 2016 Ford Escape: HOW TO ESCAPE

This tutorial shows how to replace a motor / engine mount on a 2013 - 2016 Ford Escape. If you have excessive vibrations, or clunking of your engine when the engine is running, this is a fix that will change the way your vehicle feels and make it seem like new again.

The key thing here is to SUPPORT THE ENGINE when you detach the old mount and put the new one on. You just need a floor jack and wood block, and you'll need an 18mm and 15mm socket and torque wrench aside from the other items to get under the wiper cowling.

Amazon Affiliate Link:
1.6L Engine - Right Engine Mount: CV6Z-6038-B

[Coby-D]

Fantastic video! Helped me with everything I needed to replace the motor mount on my wife's 2016 Escape.

[marknelson]

Thanks so much. In and out in 20 minutes start to "start of the car". FANTASTIC

[travisgoddard]

I followed this step by step and it made the job so easy. Thank you

[robertcook]

Well done! I have Liked and Subscribed, something that I rarely do. Very clear and concise, with a total lack of irritating background music! You saved me around $400 by enabling me to (easily) repair the car myself. I particularly liked your inclusion of bolt head sizes and torque specs.

[DonovanGoodwin]

These step are very similar for the 2.0T Version. The mount is slightly different but I was able to change ours without removing even the underpan. I just moved the plastic engine cover and coolant reservoir and just used different extensions to get access to the bolts. I managed to call the threads on the body side and after much swearing I was able to retap and thread in a replacement bolt from the dealership. It was $4 USD for 2 bolts but saved so much frustration. The Tap is M12x1.75 if you're wondering.

[Newellx]

Anyone know what this sounds like? Could it be a similar sound as a bad wheel bearing or CV axle? I've replaced everything and still get a womp womp womp sound after 20 mph

[FreedomMatter]

How to relieve stress before tightening the screws? Or should I start the engine before tightening the screws?

[elgmac]

I will do this job soon on my 2013. When I did it on my Focus it felt I was driving an electric car how smooth it felt with the new mounts

[IMSOOOOOOOOOFAST]

Just curious how can i get access to the Ford service manual? The diagram you show with yhe wooden block/jack.

[zammy]

Are you planning on doing the Trans Mount or the Torque Strut mount ? I had the dealer replace the same mount in this video (under Ford ESP) but I still get a slight vibration when I am on Drive at a Stop Light, it does feel smoother though with the updated mount..

[nextleveljoshh]

I know it says till 2016, but wondering if this mount would also work on a 2017 escape ?

[spawx]

Nice video, bro! Can you make a video about how to clean the throttle body for a 2013 Escape 2.0?

[XtinCt]

Where can I get the service manual for the Ford Escape?

[DemonikProdukshuns]

Great video!

I have a 2013 escape and just noticed an oil leak. Do you have any knowledge on these regarding a leak?

[markmessner]

Have you heard about gas filled upper motor mount?

[Legend]

What brand of flex head ratchet are you using? Is it a 3/8 drive? Been looking out for a good 1/2 inch drive.

[markmessner]

What was the results from the transmission issue you were having?

[isabelllawless]

Thank you so so much for the video. It helped a lot.

[mauricerob]

How many engine mounts are there in a 2013 Escape 2.0 ???

[markmessner]

I want to state something from past experience with motor mounts - get the mounts from Ford themselves. It is different from aftermarket.