GE DISHWASHER WITHOUT POWER OR LIGHTS ! NO PROBLEM! LETS FIX IT! (GE ADORA)

Does your GE Dishwasher (Adora) have no power or are the lights off? No problem!! Lets fix it! Today we're going to go over this dishwasher, model # DDT595SMJ2ES . Let me know if these fixes work for you!
Parts for this fix!

Other things you may need (please use dishwasher cleaner!)

[BreakFixRepair]

Welcome Back! Today we're talking about a GE dishwasher with no power! Watch this video all the way through so you can fix yours too! Let me know in the comments below if you need help and I'll do my best! Don't forget to like and subscribe!

[charlessherman]

My dishwasher stopped working and I've been troubleshooting it for 2 weeks now. I found the solution to fixing the problem thanks to your video. Nowhere else online told me much of anything past "replace your control board." Which didn't solve the issue completely.

Turns out I needed to put power back into the board before plugging the door's harness back in, after replacing my control board. After checking that the voltage on the door's power outlet on the control board was correct, of course. Now my dishwasher is back up and running all because someone finally went over info that other people didn't seem to include. I appreciate this video!

[mikes]

It was that little Bad Boy plug for me too. Thank you !!
I'm an Industrial refrigeration & HVAC tech. Can't stand working on little stuff I can barely fit my hands.
Was about to order a new one instead.
my wife is happy and she thanks you too.
btw mine is a GE model GDF630PSM3SS

[deborahspanier]

My dishwasher stopped working over a year & a half ago. This fixed it!!!! Thank you!

[saragbChi]

it worked! so excited. it was the little plug. unplugged it, blew it out and waalaaa! so grateful

[ryansgale]

Best Video ever!!! I have the same DMM and dishwasher. I got 30 volts and it still will not turn on. It must be something with the door or button.

[JoshSmith-fqci]

In my experience cycling power is going to be a short-term fix. I do several of these a week. Sometimes a firmware update with the GE Service Tool solves the problem. Also When you're checking voltage at pins 2 and 5, if you use needle leads and back probe to the harness it's way easier. voltage from the control board should be 14 volts. It could be a little bit one way or the other but if it's way out of variance or no voltage it should be replaced. If I have a bad control board I replace both boards. If I'm getting good voltage from the control board I only replace the ui.

[matthewjury]

Bro! Thank you! That was silly easy and worked. Power went out this week, and when it came back on, the dishwasher didnt. Thank you again!

[ClemensGreis]

Thanks. Exactly what I needed. Unplugging and reconnecting the connectors as shown in your video fixed my GE dishwasher. 😀

[evanv]

Worked for me! Unplugged and replugged power supplies 2-3 times each. Thank you!

[ronl]

This did the trick. I'm glad I found your video! I was about to order a circuit board

[tombiamonte]

I did a unplug and repower and it worked great!! Thanks!!

[chucklane]

Thank you sir! It was replugging the small connector. It worked!

[drewfelz]

Thank you! Your video helped me fix my dishwasher. Much appreciated!

[curtchase]

I have the same problem. Dead U/I panel. I replaced the main power supply/control board but still dead. You did not mention a green LED on the board. Mine has it and it lights up steady. Another video said if the LED is on steady, then comms between the control board and U/I board is missing. Also, you measured 30 volts on pins 2 and 5. Supposed to be 13.5 volts on my board, as well as another video pointed out. I would have liked it if you re-measured the voltage on your new control board to see if is still 30 or 13. I still haven't fixed my DW as of this writing.

[stepheather]

so last night I did the unplugging two things then plugging them back in and it worked ! the lights came back on but since I already did the dishes I did not use the dish washer last night. I heard it making the beeing noises again last night and sure enough all the power was off again this morning . This afternoon I did it again and it worked again so I immediately did a wash. So I am looking forward to seeing what will happen tomorrow if it keeps happening what should I replace on my GE GDF640HGM2WW ?

[CSibbSubaru]

I have a similar issue that I cant seem to pinpoint.
My dishwasher will lose power, just like everyone else watching this video, howveer, when I am able to restore power, the UI will begin to randomly let off an audible chime, randomly throughout the day, presumably until it goes back out and loses power again.
Any suggestions?

[edsoncolle]

Hi there. Thanks for your video. My DW is a GE GDP615HYNOFS although it still works after I reset the circuit breaker. Here is the problem: After the machine washes the dishes I empty it out the DW and in a short while there will be a beep that continues to beep every half hour or so for a few days until ( I dont use it everyday) the machine turns completely off and wont be able to be used till I restart turning off the breaker for 10 to 15 min and turn it back on. Only then the machine comes back to life and I can run it again. Do you think the replacing the control board will solve the problem or could it be the other board at the control panel on top of the door? Thank you!

[stevefuentes]

Thanks man!!! I save money ...I did what you suggest to do if no power.. It works!!!👌

[Gals]

Brother, that worked! You’re awesome. Saved me some money.