Fixing My Very Slow Filling Toilet Cistern

preview_player
Показать описание
Thanks for joining me on the channel, I hope you enjoy & find it useful.

This had been going on for a long time with the cistern taking circa 20 mins to fill, but in the last couple of weeks even an hour wasn’t enough so couldn’t delay this job any longer.

I look forward to your comments & please subscribe.
DIY Dick

#diy #diyneverstops
Рекомендации по теме
Комментарии
Автор

Thanks for this! $6 part and all fixed!

juleeng
Автор

All you need to do is change the faulty inlet diaphragm. You dont even need to take everything apart

Complain
Автор

Really good video, straight to the point

cuqvoox
Автор

Thanks for this, I have the same problem on a similar toilet, 3 hours to fill at the moment!.

uktony
Автор

As a site maintenance guy in a school, I am always fixing toilets, I could strip one down and reassemble it blind folded lol

GSF
Автор

great video as i gone through a similar issue the little inlet valve is the answer £2 on ebay give or take. full system flush and inlet valve dont make £50 i'm going to buy a couple for spares for the future

dannyceccarelli
Автор

Check the obvious the washer first before you start taking it apart from underneath, should of known when I seen putting wood filler in before removing all the rot, splicing new piece of timber is the answer

meganjb
Автор

Very good video you covered everything it might be.

lennykelly
Автор

What a cowboy all that when it only takes a £2 membrane wash

williamord
Автор

What is the name of a top mounted push button cistern?
Thanks anyone know?

mervynjones
Автор

Plumbers mate, on a rubber washer, lol

derekelford
Автор

When the diaphragm perishes, parts of it can block the outlet since its such a small hole. Unblock it and renew the seal.
You're welcome.

Marky
Автор

Looks like tha siamp washer was faulty ie spilt so repair insitu possible - £3 and 10mins, but you now know all else is okay with feed... An all round helpful video post. Cheers.

shouwill
Автор

I don't think you're supposed to use PTFE on plastic fittings...

oneall
Автор

This is why plumbers are loaded, go the massive long way around before checking the obvious

reidaz