How i desolder and solder the part of Joystick from PS4 and PS5 Dual Sense controller

in this video, I'm going to show you how I remove the part of joysticks from PS4 and PS5 controllers. repair the drifting problems.
Tools that i use in this video

[Hamza-kzqe]

I think you should replace the name of the video to how to replace analog stick (close zoom) because this video is very very good
Nice job

[_King_Tech_]

One of the best tutorial around for this specific case! Thank you very much for uploading it!👍

[KosturKos]

Gorgeous video, both camerawork and cleanliness of desoldering! (Not that I'd know I ain't desoldered in my life)

[JUFRICALEUE]

Of the most practical tutorials, thank you for sharing your knowledge

[dannyboyify]

Soldering knife tip method has to be the best, i feel like heat gun always runs the risk of damaging components and this seems to be the fastest way too

[GoopyGum]

Lol, love the very first tactic is literally just trying to heat up the pins and pull until it comes out, classic tinker energy

[maxdergroe]

Tbf, my fav method is with the soldering iron and solder wick. Its clean, fast, and requires little preperation.

[Grimmjow]

great tutorial. I would love to see a video of your workshop and equipment you use. Great work Thank you 👍

[kraptastic]

That clog-nose on the iron is pretty smart

[damondr]

broo amazing, so thankful to have found this video

[recontv]

One question, for example I allready have 1 broken controller and my new one got the same issue with the potentiometer so can I use the old one and use it for my new one ?

[Eddievargas]

What solder do you use? Will any work?
Also what flux is best/ do you use

[alirezajabbari]

Very professional! thank you for the video!

[MrReff]

Great Job and Clean! Thx for sharing bro 🙏

[Antzmacadamia]

Can you include in the description the repair green paint material you used at 2.50?

[maucrafterxd]

Danke dir für das tutorial ich bin gestern nämlich verzweifelt

[AI_musician-]

Не пользуюсь демонтажной лентой, она сильно царапает лак и на видео это очень хорошо видно, я использую горячий воздух и оловоотсос с пластиковым носом для удаления олова без повреждений лака

[tizzlebub]

What’s the name of the foil that you used with the heat gun?

[grojas_pw]

What is the procedure to remove tin from the soldering island with the desoldering mesh?

I try to remove it by applying solder paste to the mesh and it doesn't come off easily like yours.

[Awayze]

Trying this on a bashed up controller I got cheap that has joystick drift with a cheapo solder iron and sucker. Not only is hard to see the tiny holes but the sucker literally doesn’t suck. Probably messed up the board at 450 degrees trying to get the solder of