PID controller demonstration

This channel is designed to offer insight and background on the science, art and practice of making alcohol based products at home.

[glleon]

This is a great value. I built one for myself before George started offering these. Great if you like to build things, but it can be a hassle to source all the parts, make the enclosure and wire it up. Let George do it, he’s retired!

The PID module offers programmability to get to a temperature and keep it there. I found it pretty tricky to get the right values for P, I, and D to get up to the target temp and keep it from running over. However, George has a video on this and the PID module has an auto-tune to help set the values.

By the way, this box also is great to control a heat source in a fermentation chamber (insulated box big enough to stick your fermenter into). You can set it to control your heat source to a target temperature and walk away.

[gerryquint]

Hi George, Once again, thankyou for offering the pid's, as I did purchase one from you a few months ago.
However, I'm going to try and give you a call later this week.
No matter how many times I attempt to calibrate, my temperature varies about 8 degrees, never settling down.
For the record, I did let my still sit about 110 for 30 mins, and calibrated at 120 for another 30 mins, but to no avail.
A theory of mine is the probe is not long enough for my particular reflux still. As I mentioned I can phone you as it may be simpler to have this conversation in person.
Cheers, and Happy St Patrick's Day

[donaldchyba]

hi George I've been in the hobby for about a year now you have been fantastic. thank you so much for the help I've Gotten from you. I'd love for you to test out one of these new devices, Auber EZboil DSPR320A instead of a PID.
Thanks, Doug

[RedBeardOps]

Do you have any tips or videos on how to tune a RexC-100? How to use the Auto-Tune. What to set the P, I, D to?

[joemonte]

Had George build me one couple months ago. Works exactly as he says in his video. Makes controlling your temperature hassle free

[johnnytoy]

Under which page and which icon do you set the temperature you want your still to run at?

[nvmc]

I’m crazy about the controller boxer!! I would like to see a BRUTUS verion.. What are the chances of a George crafted BRUTUS controller ? I would be satisfied with a single burner Distillery controller.

[flatbedtrucker]

Hey George I’m going to be contacting you this is just what I need Awesome review Thanks 🤙

[johnmorgan]

Would that work for a turbo 500 or does it need one ?

[paulgilbert]

I recently built a PID controller using your video's and wanted to thank you. It was fun. I have a question about doing a spirit run and the actual temp settings you use during the run. Do you start with a setting of 140 or so work your way up? Or other? Thanks again for you passion!

[charlesschmidtke]

What is the web address for your store George?

[mace]

Can you use one of these on a still spirits T500 boiler/still? Will the temperature probe fit into the hole on the T500? I’m looking for a good way to help control the temperature in addition to the water flow controller.

[tonyrollin]

Hi again I have another question is the Mypin TA4-SNR PID controller and the Rex c100 pid controller hooked up the same way

[eyebasedlazer]

I'm looking for a PID that can support a 2000w hearing element in a 110/120 circuit