If prime bulb DOESN’T pump gas “watch this first” echo string trimmer (testing check valves)

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

My symptoms exactly. Thanks for the testing procedure. Narragansett Bay.

jebsails
Автор

Thank you sir that's a damn good check valve video for small engine repair

Dr.TBaggins
Автор

Very good step-by-step video This will help a lot.. 👍

augustmelinda
Автор

EXCELLENT VID!! thank you for posting, my brand new Echo blower isn't always pumping up and I'm sure this is why.

rickdougherty
Автор

Thanks for the help. I learn something. Appreciate it

joesoto
Автор

Great information my friend! You might want to try soaking those and your metering diaphragms in brake fluid! I hear that it has something in it that soften up the rubber and just so as everyone knows, The ethanol alcohol in gas is not the demise of your diaphragms! It's Benzene that is in pump fuel from the gas station. And something else that will make these 2-stroke engine carburators stop working is paraffin wax that is in crude oil pumped out of the ground. What it will do is put a coating of wax so fine across the screen in the fuel inlet that you will have a hard time seeing it! But if you put a couple drops of fuel down inside the hole that the screen is located in you will see that the fuel won't drip through the screen because it has a fine layer of the wax across it that won't allow the fuel through. 😉

tonymayhew
Автор

Can use a tiny drill bit & will open up the holes from obstruction & it ewill work also without soaking or buying new cab

scottseal
Автор

I though they were jets omg i stuck the torch tip cleaner in there omg😂😂

comedytime
Автор

No one showed this in any of the other rebuild video. Nice video. What I don't get is why you can't suck or blow any air through that one inner check valve but it's good. What's it for?

georgecolbert
Автор

Thank you so glad you made this video.

nereidadelgado
Автор

If the Second Valve doesn’t allow air either way then how it functions with gas seems to contradict. A one way valve should not stop flow both directions or else it is a problem

magicone
Автор

I can't figure why the second check valve would not allow air to pass either direction. Was it clogged or is the tiny spring strong enough to block a human from building enough pressure / suction to flow past the tiny rubber flap ? Have you tried a device such as a Mityvac to see if it would flow ?

jameskrivitsky
Автор

This is a brand new carburetor and it worked. I replaced broken fuel line now won’t work.

rolandthethompsongunner
Автор

Hi I've got a echo pas2400 strimmer it primes good when cold but when hot and left for about half n hour it won't prime fuel up what is the coz regards

roboffroad
Автор

Where did you buy the carburetor for $12

TheRealNewPath
Автор

Don't forget to always place Premium Fuel.

johnc
Автор

My issue with a new to me discarded echom it was filling until it sat. Can u recommend vender or venders for a new carb for 225i? I'm not even going try..just buy. 11-18 bucks is better than just the check valve



It's a new to me carb.

ballershanelle
Автор

google said it's not supposed to make a noise when you prime and if it does it's sucking

sandmansimms