EASY PRIMER BULB FIX FOR PUSH LAWN MOWER THAT DOES NOT START EXCEPT WITH STARTING FLUID DIY

Your push lawn mower only starts when you spray fuel, carburetor cleaner or brake cleaner into your carburetor. Then it runs fine.
This short, easy DIY video will show you how to diagnose it and the most common reason your primer bulb doesn't work.
At one point in the video I said vertical and meant to say horizontal.

CLICK THIS LINK FOR THE 2 STROKE PURGE / PRIMER VIDEO

CLICK THIS LINK TO REPAIR / REBUILD PLASTIC CARBURETOR FOR FREE VIDEO

CLICK THIS LINK FOR OUR STORE TO GET YOUR TSHIRTS HOODIES AND MORE !

THE LINK TO OUR CHANNEL TO SHARE WITH YOUR FRIENDS
UCA9GlAGvSMsoXBPR77JTTJQ

EASY PRIMER BULB FIX FOR PUSH MOWER THAT DOES NOT START EXCEPT WITH STARTING FLUID

#smallenginerepair
#primer
#carburetor
@restore

[RaleysSmallEngines]

Click this link to visit our store to get your T shirts, Hoodies and much more

[tomshearer]

This helped me out to running condition 1st pull start for a friend of a friend who is very appreciative of you and your channel

[Iflew]

Thanks for posting the video! I had cleaned my carburetor, put everything back together, and had no priming. That little channel was plugged with gunk. Easy fix!

[toneloc]

Thanks for mentioning the brake cleaner for the carb. It worked! My wife and I were happy. We had company coming over so it had to get done. Thanks again brotha!

[andreyzagoruyko]

THIS GUY KNOWS HIS STUFF THANK YOU SOOO MUCH! Chinazon, haven't heard that before, nice.

[Big_Johns]

Looked it up, the primer removal tool is $55 and the insertion tool is $37, that $3 socket modification tool sounds like a great idea brother. 👍👊
Nice video T-Bone, Happy New Year to you and Mrs Bone. 🙂🎉

[rauljr]

Great video and even better tip on the how to make the modified tool for replacing the bulb! Thank you and Happy New Year to you and the Mrs.

[EWB]

If you look down in the hole after you remove the primer bulb, you will see a screen that is removable. I have had those screens stopped up with dirt. Also, the reason that the primer doesn't work, is that the hole in the gasket is not lined up with the carb hole. Put the cover on and leave slightly loose. Get canned air with a straw or turn your compressor pressure very low. Blow air into the hole on the front of the primer bulb while moving the primer bracket. Once the two holes are lined up, you will see gas, tighten the bolts down. I have never had to install 2 gaskets or replace a bracket. It is almost always that the 2 holes are not aligned. For ease, I keep a can of canned air in my toolbox just for this reason. And yes, the whle can also be clogged like you said in the video.

[courtneyroy]

Great show, the primer plastic vain you put soap in to see if it's working, does that lead to a jet hole on the carberetor at the end of the vain or valley, because mine doesn't so its going nowhere, what should it be doing please with the connection to the carb please

[mrpearl]

The socket hack is a good one have to try it 👍 Happy New Year 🎇

[maradavila]

Thank you for this video. Very informative. ❤

[TheBandit]

This was an informative video for those who might have this problem great tip thanks for sharing. Take care and have a Happy New Year.

[tinkeringtaylor]

Really good information T Bone, i know a lot of people have trouble with type of primer thank you Happy new year 🎉🎉🎉

[ken]

Learned something new again today! Now can you do the same video on a Tecumseh flat head carb?

[jamesronnie]

This is great stuff, my brother. Keep it up.

[larrylucas]

Been pulling my hair out about this issue. Thank you for the quick fix! Member for life.

[Turningwrenches]

I like the tips I have some primer bases that are warped and will try those fixes to see if they help our my situation when I get to them . Good video t-bone

[philliphall]

I used a cheap set of pliers and welded welding 1/8 rods to it and bent them to fit the release points
Works, $3.00

[amosbeasley]

Ty so very much! With this videos help, I (not mechanically inclined at all) have fixed my mower. Again, ty.

[jwayne]

Raley😊you just blew my mind, thank you