3 Things You Need to Know About Foam Cannons #Shorts

[archiepezek]

I have a 1.2 GPM electric pressure washer and an MJJC foam cannon with a 1.1mm orifice and I get great foam.

[thomasshelby]

E46 pre-facelift front with the M bumpers looks so damn good, its an art piece.

[visioncorp]

The actual point of the foam cannon is the make it easier to wash your car while in direct sunlight.

If you have proper output, the foam should be thick and stick on the surface. This makes it so by the time you’re halfway around the car, the other half is still foamed and protected from the hot rays of the sun, reducing the chance of streaking or water spotting.

[jamespitts]

Thank you, my carnever looked, so good

[samueladams]

I was looking at the Ryobi pressure washer and it has 1.2 gpm rating. Will this foam cannon work with that insert ?

[newera]

When I changed to 1.1 mm orifice my pressure washer started "oscillating". Great foam for 3 seconds and pressure drop for the second. Then great foam for 3 seconds and down pressure again. Like a waive pattern. What is causing that?

[TheGjkddk]

The active 2.0 and the Ve52 it’s recommended not to use the 1.1 mm office though from what I’ve read? It make the pressure washer surge since it’s not made for to be used with a 1.1

[hydenever]

For the form cannon, is that compatible to the most of electric pressure washer?

[ChoklittRockett]

Bought your stubby gun and the swivel, huge difference !!

[Walker_]

My dad just bought a 2023 Dacia Duster and he takes it off-roading sometimes but it gets dirty really quickly, any tips on what products I should start out with to clean the car?

[hunterramos]

I have a 3200 psi 2.5 GPM Husqvarna (gas powered) pressure washer. Is this too powerful? Do gas washers work for detailing?

[scottmattern]

You aren't getting 2 gpm on most electric pressure washers, nor is it needed. For some reason obsessed garage got everyone to think that you need more water. It might save a little time, but only very little time, and your water usage will increase. As far as cleaning ability, it really isn't all that important to hunt down an especially high flow pressure washer, unless you're in a high volume detailing environment.

[yaboycorbin]

What’s a good pressure washer off of Amazon?

[LeathermanSoftwash]

Hey can you guys make a super high quality 1/2” quick connect like you do for the m22 adapters hard to find good quick connects made with quality stainless steel

[adamhill]

Will a 1.1mm orifice be ok if I have a pressure washer rated for 3100gpm and 2.3psi?

[j_boogie_]

had no idea to add water to the soap. I just filled the whole thing with soap.

[JS-fbww]

It's the 1.1 mm orifice a smaller or bigger diameter than the orfice that's already inside of the foam Cannon thing? The orifice on the phone Cannon thing that I have looks like the hole is bigger than the 1.1 mm that I ordered on Amazon after watching this video.

[francisbalfour]

Think my 4.2k psi 4.5gpm will be powerfull enough? 😂

[pabis]

Hey my mckillans pressure washer gun gets stuck when I let go of the trigger and keeps spraying water anybody know a quick fix?

[fallensprays]

The foam cannon is to equally spread the soap.