Day 11 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

SUPPORT KEVIN'S TUTORIALS

TOP FUSION 360 PLAYLISTS

SUBSCRIBE (& Hit the Bell!)

TIMESTAMPS
00:00 - Day 11 3D Model a Dog Bowl in Autodesk Fusion 360
00:33 - Sketch the side profile of dog bowl in Autodesk Fusion 360
02:42 - Surface Revovle the Dog Bowl Profile in Fusion 360
03:08 - Add Fillets to Dog Bowl in Fusion 360
04:38 - Turn Surface into Solid in Fusion 360
05:37 - Offset surfaces in Fusion 360
06:20 - Apply Appearances in Fusion 360
07:47 - Next Lesson Day 12

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk

[microArc]

after watching the first 8 of your videos, i was able to crudely model over 12 functional 3D prints. these last 3 videos answered questions i had and several more that i didnt even know i had. thank you. thank you so much for these fantastic turorials. you've opened a whole world of CAD to me in a way that no other resource could.

[iagmr]

After the challenging phone case, this was a nice change of pace. I could actually follow along without errors

[Akbar_Friendly_in_Cherno]

If you are getting hung up with not having a fully defined sketch after the 55mm line this is what worked for me. Don't hit Tab to switch to the degrees (angle) field to define that. Instead define the length (55mm) then escape out and define the angle with the dimension tool separately. No idea why this works.

[rommerts]

Great tutorial Kevin. As some other people have already noticed, the part with the rubber edge is difficult, but in the end I succeeded. On to your next part. Thank you!

[davidtrimbee]

I have taught 3D CAD to thousands of students over 20 years using AutoCAD, Inventor and Solid Edge. I am now getting Fusion 360 up and running in a new maker-space for the general community to use. I really like your teaching technique, well thought out, always adding small "bits" to each tutorial. Well done. Will be sharing this to maker-space members for sure. If you are new to Fusion 360 or 3D in general be patience with yourself, it comes quick.

[MaxGoddur]

Watching your videos reminds me of how little I really know when it comes to Fusion 360. Thank you for another great video and for the creation of the PDO family. For me, today's SURFACE video currently holds the favorite spot.

[tofuguy]

Beginner here - Thanks for the excellent tutorials, they've been a great help! Waiting for the rest of the days lol...

[AleksandrasVasinas]

Had an issue with an Offset error at about 5:56. Turned out it was the Fillet affecting the Surface Body, as, after the command, the Body had 11 faces while in the video it was 10. For me, the problem was that even though I selected 2 Edges with the Fillet, after opening the prompt again from the Design History, it said "3 Edges" selected. I ended up selecting the Face that is between the two Edges (the 2.5mm line) and applying the Fillet to it. That kept Surface Body count at 10 and I was able to perform the Offset.

[CraigHollabaugh]

Been using F360 for 3 years and (ashamed to say) that I've never used the surface tab. Looks like I need to add that my lesson plans. Thanks.

[ayhanyildiz]

this offset surface feature is so powerful. In previous tutorial had to do all projections for buttons and holes but with offset surface feature got done like 10 sec. wohoooo

[framma]

these tutorials are exceptional, please keep them coming!

[gregoryhavensii]

Would be good to mention you are turning off "Chain Selection" in the surface offset. That one is hard to catch when you do it quickly with no mention.

[marcus.guitarist]

Nice. How did you get the line on the bottom to automatically use a parallel constraint?

[francoisdavel]

I am attempting to design a co-axial rifle front rest. These tutorials are FANSTASTIC to get me started and brush up on my long lost CAD skills in Fusion 265. This software is UBER cool!!

[fortifor]

Well explained. Surface modeling looks really good in this software.

[phobosgmd]

hello kev, at 1:30 when you change the angle to 100 degrees, we try and follow in your steps but are greeted with an error message saying “dimension would over constrain the sketch, create a driven dimension” when we click ok we are unable to change the angle, help would be appreciated! 😊

[rk]

Really enjoying your videos and teaching me a lot! Thanks. When are we going to get to assemblies?

[johnnyknap]

Excellent tutorials Many thanks for such clear and concise explanations.

[janussQv]

Drawing the line without pressing Enter or Esc in the begging (2:00) was the only way to achieve locked constraints for me. Tried many times with pressing enter in between line draws and I would always end up with a blue line somewhere.

[davidharris]

any idea when the next videos will be out