Day 14 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

SUPPORT KEVIN'S TUTORIALS

TIMESTAMPS
00:00 - Day 14 3D Model a Flathead Screwdriver in Autodesk Fusion 360
00:17 - Create components in Fusion 360
00:53 - Sketching the handle of the screwdriver
01:37 - Sketching the grip cutouts
02:13 - Circular Pattern Features in Fusion 360
03:23 - Fusion 360 Intersect Command explained
05:46 - Apply multiple Fillets in Fusion 360
08:13 - Creating the screwdriver shank
09:13 - Creating the screwdriver tip
11:13 - Modeling Mirror command in Autodesk Fusion 360

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk

[jimb]

@10:15, if you are a little too careful placing your 3 point arc, you can end up with an accidental midpoint constraint indicated by a triangle on the top line. It will block you when you try to place your 2nd dimension between the corner edge and the second endpoint. Click the triangle and delete it.

[ChadFaragher]

Every time I watch one of your videos I feel like I've just leveled up in a game and spent my new skill points on intelligence.

[krishnarang]

This is amazing. This course is sharpening my design and engineering skills. Keep up the great work 😁

[paulzacharias]

It's hard to believe how fun and informative your videos are. I have learned so much. Thank you!

[gmcthelegend]

Another great video. Really appreciate how you emphasize thinking through design modifications. Looking forward to the next one!

[jimbarchuk]

Timeline: 7:07 Shank
9:01 not 9:13 Tip
Excellent vids, fast, on point, no

[bawdydog]

Never tried cad before in my life. Following these lessons as a break from games, and for possible hobby use later. Tutor is easy to listen to, and lessons are easy to follow. Just wish I had duel screens!

[gaspassman]

I remember watching episodes of Game of thrones and it was so painful to wait for the next episode. This is 100 times worse!!! I need day 15!!!!

[neilpreston]

When you Extrude the handle Cylinder, you initially move the extrusion arrow forward, causing a negative distance. However, if you watch closely in the dialog box, the distance is set to a positive 100 mm, extruding it into the plane. I had trouble getting the intersect function to work until I re-examined this step.

[visualantidesignco]

Awesome Lesson! this one was a lot of fun, I got a little carried away with the appearance lol Thank you again for making these

[builderjake]

10:36 there is no mid-point in the projection to tie a constraint to... not sure if this is caused by the latest update?

[maciejjabonski]

Thank you for those tutorials :) Following day by day

[K_Nunez]

Thanks for this video tutorial man. I learned a lot from it.

[chirpter]

getting more of a sense for "project" & its importance every lesson!

[wimkraatz]

Thank you so far. Amazing videos!
day 2 for me and got to here already :-) and freestyling a bit too with emboss tool on dog bowl etc.
All your videos have been of great help!

For every body that designs a screwdriver handle the proper brand screwdrivers have 6 grooves in handle and those should allow for a ring spanner to fit over the handle to help with force to turn.
Just wanted to share this and a big big thanks for your amazing videos.

[ThriftLife]

at about the 10:32 mark, I try to add sketch dimension between the first point and the Center point... but it isn't showing a center point, there is no center point for me to select. I've watched this section of the video many times now and can't figure it out. Any help is appreciated

[milehighslacker]

This is an excellent beginner fusion360 video! I learned so much about how to do simple things, things I was doing in wayyy more complicated steps. Thanks!

[AUCongnitiveRealist]

If you can't get the tip dimension constraints to work, create a centreline but right click on it and change it to fixed. Then set your points.
I found this when setting the 0.5mm dimension would pull my centreline out of place.

[charlieott]

When selecting the sketch to dimension the radius I don’t seem to have the ability to do it the way it is done in the video. I have to click directly on the end point. 4:05

[Capafool]

I changed the size of the shank hole without first performing the projection operation and it worked just fine and the shank width was updated also. Not sure if that's an enhancement since this was made but the projection step was not needed in this instance.