How to troubleshoot under frequency & over frequency benzblogs

Technical and intertainment

[peterw]

Welcome back benz. Hope you enjoy your vacation back home. Keep safe😊

[arneljavier]

Good day, kuya jie Ang galing mo ingat palage sa mga ginagawa mo god bless u

[LN-]

Hi Benz, it shows 2 faults, an oil pressure sensor, and an over-frequency runaway. is it ok if I bypass the oil pressure and adjust the over-frequency delay to confirm its ok?

[ZhangLee-eh]

Good day sir
Once I start the engine speed increases immediately and shot down please what can be the possible course

[ИгорьКотов-зд]

Hi mate
Thanks for your video
Can you help me with advice
My generator is shutting down under frequency when I'm applying quick load.
When load increases slowly- it is working stable.
With fuel line everything is ok.
AVR new, pump new, infectors also new.
Magnetic Pickups new. Voltage is stable.

[reynanlago]

Salamat sa idea idol. . .I have a friend trouble shoot about that problem naka tulong talaga. . . problem solved. . .

[vinisrael]

Good job sir but if you focused the camera on the buttons as you control it would be better

[דניקבישי]

hello, can you tell me what can cause the surge arrester (installed with bridge diode) to burn out? and why it's installed, or In other words what can cause voltage spikes?

[glumawig]

Sir, without laptop, is it possible to configure settings via navigation buttons? Also, is there a calibration menu for this controller? Thanks po!

[leandrodelpuerto]

Sir. Patanong naman kung bakit nagpa fluctuate ang voltage sa voltmeter.. pati mga ilaw ay kumukurap sabay sa voltmeter. Nag check ako sa diode ok naman.. posible kaya na avr ang sira? 10 kva po pala generator ko assemble sa pinas.. yung ang engine ay 3 cylinder kubota na diesel. At mindong ang kanyang generator motor. Thanks.🙏🙏🙏

[Hamidkhan-s]

Hello bro watching you for long time but haven't left any message today may I know where do you work?

[josephoyewale]

Good day, l have a perkins 2500 series 500kva generator, when running on no load it shutdown on under frequency alarm

[trabahongelectricianmancab]

sir....ung frequency ng generator nmin taas baba...may sensor po ba na maaring palitan o maaring nasira..na kailangan palitan...salamat po...good day....

[JohnGeorgewill-lk]

hello sir, i must commend you for your good work. how can one get an American spec generator, 120V, 60Hz to operate as 220V, 50Hz? Thanks.

[_OLAS]

Does this program work for (cummins )generator?

[cristianjayavila]

Sir nakakaapekto po ba pag bumaba rpm ng generator baba din po ba ang hertz po?
Example 1800 rpm 60hz
Ngayon po 1731 rpm 57 hz po.
Cummins generator gamit po namin

[joehubbie]

Sir, what is the problem when i start my generator but suts off again after 10 second? LW genrator 50 kva

[sundayalaiya]

If you are in place where you don't have computer to configure under frequency, how can I do it manually?
I have 60kva Generator always showing under frequency and can AVR cause it?

[alanrubio]

I have a 30kw generator single phase and when I turn on air conditioning the voltage drops from 248 to 170 in 1to 2 seconds but in that time computers shut down due to low voltage. What could be the problem. Before it was not doing that. Exciter was rewinded and have voltage of 248 L1 L2 and 128 L1 N. why voltage drops

[nickagravante]

Sir good morning ..suggest po n topics po about cdvr avr and cat control.. may avr na cdvr n nagovervoltage