How To Program A Ford Mustang Remote Key Fob 1999 - 2009

An easy to follow video on how to program a remote key fob for a 1999 - 2009 Ford Mustang .

1. Unlock all doors using the power door lock switch on door panel.

2. Turn ignition from OFF to ON 8 times within 10 seconds, with the 8th time ending in ON. Door locks will cycle to confirm programming mode. (*ON is as far forward as you can turn without starting the vehicle*)

3. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

4. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming. (*If you only have one remote to program skip step 4*)

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

[luandam]

Simple, straight forward and to the point video. No chit chat just clear instructions! Thanks

[ErickFooty]

Great to see you aren’t just yapping like other tutorials. Thanks

[Scandalous_behavior]

Thank you so much! This video saved me $70 “program” fee from the locksmith!

[DJKrayzie]

Hey man thank you, you sir saved me 100$

[philipcregger]

Thank you for this! It worked perfectly.

[erichkoehrsen]

This worked perfectly! Thank you very much for the video. I’m grateful.

[ArnoldWatson]

Excellent, worked like a charm; thank you!

[jworle]

woah. that was easy. i got one for my Avalon too, it was ridiculous, like 20 steps including key in and out and ignition on and off and door lock buttons and a silent prayer.

[NoraHawkins-jelz]

Wow what a public service. Dude out here just saving us all some money.

[Septagrim]

wow thats actually quite easy. does every mustang have keyless entry or is it only specific models?

[TLRam]

If you have a good remote and programming a backup remote, YOU DO have to program both as if they were both new. If you don't the already programed remote will be inoperative.

[dannybryant]

Hey how i get my keyfob there's 2 kinds one with only unlock nd lock and another with the trunk if i get the one with trunk open will it work??

[jacobrusso]

I LOVE YOU MAN!!! NO HOMO lol
Thank you!!!

[jessiematamoros]

So I just did this with an aftermarket key fob, and it worked... the only thing is now my radio will not turn off after i completely turned off the car...any tips on how to fix this? It was working fine prior to the key fob programming.

[ThQ-ld]

يا صديقي الريموت يعمل داخل السيارة فقط لا يمكنني استخدامه من خارج السيارة ماذا تنصحني ؟؟

[thisfooboxingsuperseries]

Can this be done if I don’t have the og key fob, I lost the key fob

[AngelLopez-iwpk]

I just got a new key fob and when I tried to program key fob it doesn’t work. I turned if 8 times the doors cycle but when I press a button on the remote nothing happens. I switched out the battery too and that didn’t help what should I do?

[Productions.]

Question, this has to be done once the battery is replaced right??

[ipodman]

You don't need to do the 8 cycle again if you have more than 1 fob you're trying to program, just go ahead and hit buttons on any additional fob.

[MrSHADOW]

Do you have to have the original key fob to program a new one because my got lost ?