How to Reprogram a Ford PCM

If you've purchased a reman Ford Powertrain Control Module (PCM) you may need to reprogram it before installing on the vehicle. This detailed video explains the steps required for proper installation.

NOTE: Replacement unit part numbers ending in "F" means the module must be Flash programmed with the correct calibration programmable parameters and VIN
**Make sure to have all tools needed to program including a PC with internet connection and a Ford approved J 2354 tool or Ford vehicle communications module (0:36)
**A subscription to the Ford module programming applications for the J 2354 tool or integrated diagnostic software is also need (0:42)
**We recommend connecting a battery charger to the vehicle during programming or learning procedures (0:57)

Was this video helpful. If so, make sure to like it, and be sure to subscribe to our channel.

Stay connected for more updates and tips:

**Disclaimer**
At CARDONE we cannot guarantee against improper interpretation or application of the information we present in this video. You should always follow the enclosed safety guidelines, consult your OE repair manual for correct specifications when performing any install or repair procedure. Any injury, damage or loss that may result from improper use of tools, equipment, or from the information contained in this video is the sole responsibility of the user, and not of CARDONE Industries.

[tcmtech]

*For anyone who has yet to look into this issue.* That Programmer kit is around $1800 or more depending on what you need it for.

[tompastian]

I'm so glad you posted this video. Where other videos show people installing used PCM's from another vehicle, this video shows that you need tools and computers that only dealers have for the most part to install a replacement computer, even if your vehicle has no keyed entry system. Unfortunately with Grand Marquis and Crown Vics, Ford dealers I've found don't want to work on computer replacements, since Ford does not offer the computers anymore, and there's to many other problems that dealers may not want to take the time to mess with. Sad that Ford has virtually NO customer service when it comes to out of warranty vehicles. One service rep at a Ford dealer recently told me "We don't usually work on anything with over 135, 000 miles. Why would I buy a car from a dealer like that ???

[syedakbarahmedsyedakbarahm]

Nice motivational video, Programming About ford I know v.well thanks man

[gabrielfaria]

I've ECU programmed my Ford Ranger 3.2 and it went from 200 to 270 horsepower and it even had the fuel consumption reduced I'm very impressed

[PhunkBustA]

4:36 the synth in the background tripped me out for a sec and i thought i heard a bird native to my area 🤣

[timothylowe]

Can I possibly change some parameters on it, different than what it calls for like tune it to my engine with performance upgrades?

[storker]

hello i can really use your help, I would like to get a ford VCM because like again today I got another ford that i need to replace the ECM. if i purchase this tool do i have to buy a yearly subscription or can i pay as i need it, also can i use the tool off line by taking the old data from the original ECM and move it to the new one without logging into the web. Im told wo=ithout a sub, the VCM will not work. Thanks

[jasons]

This video is hilarious. What do it yourselfer has all this equipment to do this? 😅

[onemax]

Do all Cardone Ford PCMs have to be reprogrammed? I have an 02 Ford Ranger 3.0 with no alarm system... Also, can a new Cardone PCM be be installed and replacing the old one before reprogramming?

[zennwallis]

hellow could I do a reflash with the OBD and software to my Ford Falcon Mk11. BA.XR8...2004...Made in Australia. .

[diegocarvallo]

I just bought a Mustang GT previous owner disabled the CAT and removed them. I bought a OEM replacement. If I reprogram the PCM will this bring it back to its original state?

[SiFiRocker]

thanks for the post, question with this VCM tool I really needing to get it being in the auto repair business, but since I'm starting out flashing can i use the tis like GM on a 3 day pay system or with FORD must I purchase the yearly subscription?? What I'm asking is say if I want to copy info from old PCM to the new BCM do i need a sub to be able to use the VCM to let me do this? thanks

[MeKTrzZ]

Where I can download the factory parameters

-Ford Mustang 2001 3.8L V6 M / T

[dallonrommel]

Hey, if anyone can help or has the answer to this absolute predicament PLEASE READ: I have a 2008 3.0L ford fusion, got the car with only one key and now I've lost it. So I replace the ignition cylinder and have two new keys that work for it. Only thing is when the guy went to reprogram my keys he did a perameter reset with there being NO new PCM in the vehicle. Now the scanner reads as the car can't connect with the PCM. Looked into it, turns out perameter reset should only be done if necessary.

So my question is this, basically how do I "undo" that perameter reset? Or even, what do I do now?

[dandownes]

I have an 04 f150 5.4 truck that someone put an 05 4.6 in, also a used pcm that they apparently programmed the keys to. My problem is that the computer is looking for vct's that this engine doesn't have and the symptoms are like they are stuck. Can this be reprogrammed to delete vct's?

[BadRonald]

Just got a wrench light on my 2009 Explorer hope I don't have to do this.

[MRRISK]

How much should I expect to be charged to replace the PCM? Ball park figure.

[hankhicks]

I should have bought a pre-1967 truck.

[xpcccc]

thanks very good video
can use used PCM for Ford 08 Explorer or must be new pcm ?
do i have to do security programing if it is type C pats?

[terrymorris]

If i buy pcm with vin and 2 keys programmed am i good to go it has pats