How to get a treadmill through your door

This is a brief explanation on how to get your treadmill, specifically a NordicTrack c900i, through your door. I struggled to fit this square peg in a round hole. I could not find a video to explain how. I didn’t want to disassemble the top. All I needed was to disconnect the wire that held the outer support stand to the base. I finally started tinkering with the power supply and found how to easily unplug it from the circuit board. Voila!

[soniapowaser]

Here it is 4 years later and this video is still the most helpful tool in taking a NordicTrac apart to move! Thank you for creating this content, I was prepared to disassemble my T8.5S - which was a very daunting task AND could have caused damage to the treadmill. I was able to disassemble in 10 minutes and it is now ready to move. Thank you, thank you!!!

[chargerman]

Realizing that you posted this a while back but I want to thank you for this post. I am a 72 year old male in pretty good shape and still working. I get up every morning about 3 am and walk on my treadmill at about 4.5 mph for 65 minutes along with using my stationary bike. Recently my wife and I sold our house and moved and movers could not get my treadmill in the room I intended to put it in so for two weeks is has been sitting in my garage until I watched this video. Night before last we had it apart and in the room back together in 30 minutes thanks to your video. My treadmill is a Nordic Track with 2800 miles on it so it has gotten used a lot and I have certainly missed it. Thanks again.

[ULTRA_VR]

Wow! If you only could've witnessed us moving this from our kitchen into the playroom about 7 years ago. Scratched walls all to hell and even got stuck in a tight corner for a bit sweating and thinking we were done. This would've been so helpful and now I can move it back into the front room with ease. Thank you!!

[alanlevine]

Thanks a million times over. I hired a guy to move it and now I wanted to move it again. I couldn’t figure out how to disconnect the power wire. I have the same treadmill. You’re awesome!!!!

[christinereinsmith]

OMG!! If this video did not exist, we would have been in big trouble. Thank you so much for sharing! 🧡 It was a tremendous help for us!

[daviddominic]

Thank you young man. This did save me lots of time because we couldn’t get the treadmill through the door and knew we had to disassemble the top section but couldn’t figure where to disconnect the power source. Very helpful and thank you again.

[carlosvalentino]

I watched 3 movers try to get this exact same treadmill into my bedroom. They had to take off the top panel spent about an hour trying to figure out how to make it fit. I have been dreading moving it myself. Now the time has come and I need to move it myself after many years in my bedroom. This video was so helpful. Thank you!!

[jgrantman]

ABSOLUTELY saved somebody some time. THANK YOU! I was just about to reverse engineer the install instructions and after seeing your video it saved me hours and likely saved me from other issues trying to fully disassemble and reassemble.

[mickeyg.]

Brother you are a life saver! Wife and I were so stressed on how to get treadmill through dooor. We have Pro-Form 900 and it was same! Thank you seriously!! Much appreciated the video🙏

[katalinbertram]

This video was so helpful. I have a NordicTrack c990 and aside from a few minor differences between the two different models, this was right on the money. My husband and I were able to take the treadmill apart in a few minutes, move it down a flight of stairs (which was awkward but doable) and put it right back together. Thank you for posting this video.

[davewhitten]

I agree that this is THE most helpful video I have seen for moving a C900i NordicTrac treadmill out of a room. Other videos suggest way more work. This is the BEST.

[terryt]

Thank you!! This is probably the most helpful video I have seen on YT. Nearly the same procedures apply to my NordicTrack C950. Took me less than two hours to move this time, instead of two days like last time.

[fndezhoffiz]

Dude you helped sell my treadmill. I was able to disassemble it with ease. Thanks!!!

[maryharelkinbishop]

Thank you so much! You saved us TONS of time and worry! We just followed your instructions and moved our treadmill in about 40 minutes! That includes taking it apart as you showed, moving it and putting it back together. So easy and slick!🎉😅

[danpanderson]

This same strategy works for moving a Nordicktrak 2950 Commercial between rooms with standard passage doors. We took the motor cover off, detached the main cable from the printed circuit board, unscrewed the ground wire, and unbolted the legs down at the floor level. We also removed the handle arm ends to be able to get the top half (display, handles, and support arm by removing the two-screws per side which gave us just enough to fit the top half through our doorway configuration. We then had two big pieces that fit through the doorway. We set the bottom (treadmill part on some furniture sliders while tipped on its side. Relatively simple to move and reassemble at that point!

Thanks for your videeo! In spite of not finding anything on YouTube that specifically addressed our situation, we decided to give thi a whirl, and it worked!!

[kymmedeiros]

THANK YOU!! Used this on my NordicTrack T6.5 treadmill and it worked perfectly. My brother was able to disassemble and re assemble in the other room in less than an hour.

[michellevalenzuela]

I just followed your guide and was successful without a hitch! I had a few more screws to take out but it was easy! Thank you!!

[MsDiaz-pfxl]

Thank you so, so much for posting this. I have tried to move mine and can only do so patio doors. Now I can have my treadmill where I want it.

[ontherocks]

Thank God we found your video! You saved us so much trouble and time. We actually had a different model but it worked out just the same. Thanks again for sharing your knowledge with others!

[phil]

THANKS for your kindness in posting this. Wish I would’ve seen it yesterday before removing the door to my garage which I was unable to put back properly. Still a huge help.