How to remove write protection from sd card

The disk write protected
Hi guys now i want to show how to remove write protection from USB SD card. SD card are not format because of write protection.
this usb drive are write protected, when i want to format this drive it’s doesn’t work.
let’s see how fix write protection on usb drive
now type “diskpart” and press “Enter”
now type “list disk” and Press “Enter”
now select your usb drive, in my case i am select 2
but in your case it’s may be 1
now type “select disk 2”
now type “attributes disk” and Press “Enter”
now type “attributes disk clean readonly” and press “Enter”
now type “exit” and press “Enter”
Remove the usb drive and Reconnect USB Drive
Now you can Format Your Usb Drive,
Thanks for watching

[danielalexandre]

Your read-only attribute was already off
And you missed type attributes (attribites) in the last part so it shows unrelated text at the end

[shubhaayande]

2:29 mine shows "Current Read-Only State : Yes" and yours it's "No"
And after completing the process it didn't work

[mxlikdiallo]

your a legend. thank god. mine was loading for a while in the beggining with the "diskpart" command but it eventually worked

[gulammustafanayem]

I got my memory damaged after following your steps

[houssemsaidaoui]

the ready only state was already "no" so all what you did was fake

[samuelwhyte]

The point where you entered " attributes disk clean read-only" did not work on mine. But rather "attributes disk clear readonly" . If anyone has a problem when they entered the former command, they can try the latter. Thanks

[chousam]

non pas "attributes disk clean readonly" mais "attributes disk clear readonly"

[Darkside]

If you are having a similar problem eject the sd card move the lock position to the other side.
Thank me later😂

[hellotorin]

*SOLVED* This may not apply to your specific situation. I was using a SD card adapter, connected to an SD port USB adapter, because the info was stored on a microSD. The culprit was the SD card adapter. I noticed that the SD port USB adapter also had a slot for microSD cards. So I took the microSD card out of the SD card adapter and just slid it directly into the microSD slot of the USB adapter and it worked! The SD card adapter must have put up some sort of barrier or prevented efficient re-formatting. Note that the SD card adapter was NOT in the physical 'locked' mode AND that I had done what all these other websites and videos had told me to do (CMD prompt, regedit, etc).

[maedehbhm]

You saved me man🙂I was going crazy
Thank u

[ranjeetkumarjha]

When I follow all steps
Still my SD card not in list .
I tried too much still not sd card option came.
I think this work only for pendrive not for sd card
Please help

[timeclickerstudio]

thank for information its worked, but one correction is there command you mention is wrong (attributes disk clear readonly) clean replace with clear

[sohamadhikari]

its been 2 yrs though its damn helpful thanks bro <3

[theamer-rican]

I need an actual fix for the issue not program even will work because the disk write protection

[isaactech]

New sub added bro your legit it worked very well thanks to you my 1TB is now back😱🤩

[carnagekills]

How do I change “current read only state:No” to “yes”?

[mshivakumar]

If you're using a sd card with the adapter (which we use in camera) then see if you have switched to lock on the physical adapter. If yes then unlock it and you're good to go

[georgiaobserver]

Diskpart said it cleared it but when I tried copyng a file to the disk the disk was still read only.

[villano_gringo_negro]

Worked for me... only thing was the last command was "attribites" and not "attributes".😊

[jerrycampbell]

Didn't work, even when I DIDN'T mis-spell "attributes".
Also, it's suspicious that the disk you "fixed" displayed as not write-protected to begin with.