How to Replace Engine Torque Strut Mount 2005-2007 Ford Five Hundred

Buy Now!

This video shows you how to install a new engine torque strut mount from TRQ on your 2005-2007 Ford Five Hundred. The torque strut engine mount braces the engine against twisting, shaking, and vibrating when under load, and when load changes suddenly. The rubber bushings on the torque strut mount will wear down over time, and need to be replaced, even if the strut itself is in good condition. You'll know it's time to replace the torque strut engine mount when you feel vibration or shaking, especially when accelerating.

This process should be similar on the following vehicles:
2005 Ford Five Hundred
2006 Ford Five Hundred
2007 Ford Five Hundred

Tools you will need:
• 15/16 Inch Socket
• Swivel

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ Watch the Video
√ Do it Yourself
√ Save Money

[sekrph]

there is a slight difference in installation between the
cvt and standard trans since the 2 parts are different but basically the same

[melathomas]

Did you have to spray the bolts to get them off that bar?

[krisjustkris]

Looks to me like this video is missing a lot of steps because there's no way you got that last bolt by going down the back side of the motor without removing a bunch of hoses/wires, etc...
I mean you can go strait down but once you do there is no room to move your wrench to torque on the bolt or even ratchet it.

[todvanced]

Non cvt I hve is an entirely different mount and requires intake to be removed.

[jesusgabrielayalaconsuegra]

how to replace crankcase gasket for five hundred?