How to Replace Torque Strut Engine Mount 2010 2013 Ford Transit Connect

Buy Now!

This video shows you how to install a torque strut engine mount on your 2010-2013 Ford Transit Connect. The torque strut engine mount braces the engine against twisting, shaking, and vibrating when under load, and when load changes suddenly. The rubber bushings on the torque strut mount will wear down over time, and need to be replaced, even if the strut itself is in good condition. You'll know it's time to replace the torque strut engine mount when you feel vibration or shaking, especially when accelerating.

This process should be similar on the following vehicles:
2010 Ford Transit Connect
2011 Ford Transit Connect
2012 Ford Transit Connect
2013 Ford Transit Connect

Tools you will need:
• Pole Jack

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ Watch the Video
√ Do it Yourself
√ Save Money

[Rad-Zach]

These are really nice videos and how I wish all YouTube instructional videos were. No fluff. No stories. No shaky camera. Easy to follow and all the info needed.

[steveivey-ez]

how do i get it off if back bolt has welded itself to the centre of mount and the rubber is just spinning round

[jimmatlosz]

Helpful. But why didn't you pry the transmission for the rear bolt? Currently I have my bolts out but cannot get enough space to remove the old mount. I assume this was done after replacing the top mounts? Any advice is appreciated. Thx

[sethdawg]

One more thing. The longer bolt goes on the smaller end not the other way around like the video.

[cameronhatch]

What do I do if I can’t get the motor far enough back to put back in the holes?

[sethdawg]

Bolts were backwards on mine short was in rear and long was in front 🤔 194k on it somehow someone must have got the mounting bolts on wrong when they replaced them 1st time

[esolis]

What is was the reason? For change it?