6R80/TR3650/T45 Adapter Install 302/351W

Put this video together to show the required second ops to install this adapter plate to the back of a 302/351W Ford.

Price starts at $150 with shipping included. The plate can be shipped directly to your house in 5 to 7 days from order.

Parts required:
2 each 7/16x14 counter sunk bolts 1 inch long
2 each 1/2x13 3.5 inch long bolts. Could use 4 inchers and place a nut on the back of the block side.
3 each of 7/16x14 2.5 inch long bolts for the other 3 bolt holes.

You will need to tap the 2 holes for the starter to 3/8x16 or to M10, depending on what you want to do.

[dennis]

Bought the adapter and worked like a charm. 👍🏻

[mattbeveridge]

Still making adapter for a t45 to a pushrod 5.0 engine

[cheomoreno]

Man that’s bad ass I see guys asking for adapter plates on a group I’m in I’ll send them your way

[tonymontana]

Just got his adaptor gotta give him a lot of credit

[datawizard]

So the 6r80 torque converter should basically just pop in the same way the stock 4r70w one does? A lot of the other adapters Ive seen have some kind of different pilot bushing or spacer for the torque converter.

Also you have to bolt it to the engine first correct?

[Dannymclovin]

I hope your still selling these I'm wanting to do a 351w with a tr3650 in my mustang

[samwilson]

So this must mean that the input shafts are compatible too?

[CDWR-nmfs]

Two thoughts, the 1/4" spacing difference of the TC, and the starter thread depth. Can you weld more steel onto the spacer for the starter threads? The TC is moved forward the 1/4" distance of the spacer plate. Is that undesirable to have the TC out of the trans any different amount than stock? The PA aftermarket spacer kit is 1/2" and uses weak 1/2" stud extensions. I would not want to trust those to hold the TC onto the flexplate. I would prefer on those to have a TC with 1/2" extended stud bosses.

I like the 1/4" spacer idea, but the TC ideally needs to be the same stock distance within the transmission. Have these two things been brought up before?

[luisyepson]

so technically i can use it for my 351c for a tr3650? if so count me in!

[southernracing]

Do I use a 10.5 inch foxbody clutch for tr3650 and does the extra thickness of the plate effect the input shaft to pilot bushing distance?

[zacharyhaymore]

So are these adapters plates ready to be purchased? I’d like to drop a 10 or 6r80 into my 96 f150 w/ the 351w. Any way I can get in contact with you?

[erictaylor]

Do you still sell this adapter plate i need on

[ezekielmoore]

Hey trying to find your link I'm interested in trying your adapter plate

[timbowalk]

Is this adapter available to order now

[rippinglipscountryboy]

Do you still have any for sell I need one

[marvinelzaelza]

I would like to purchace this adapter plate

[e.motiongarage]

I thought you gave up on using the 6r80?

[DavyJonesSN]

Are you still selling these? Im interested

[MrVic]

Hello Ryan, do you still sell the adapter?

[bigblackpony]

Still selling these? Tried emailing wouldnt go through