Got A Cylinder MisFire You Can't Fix Diagnose P0307 Chevrolet Silverado DOD / AFM Collapsed Lifter

preview_player
Показать описание
Hi, Donny Here, got a misfire you can fixed and tried everything. this is the diag technique i use to figure out if i have the common AFM lifter failure in Chevrolet pickups

Royalty Free Music Provided By Epidemicsound

Video Recorded With

Contact Me At:
________________________
DISCLAIMER

Some of the links above are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help fund these videos in hopes of bringing value to you!
As an Amazon Associate I earn from qualifying purchases.
(paid link)

________________________

#TheLateModelTech
Рекомендации по теме
Комментарии
Автор

Very cool 😎 to see a failed lifter (and normal lifters) visually 👍

LevelUpMechanics
Автор

Very nice idea I did it and I seen that it was exactly what you said one of the Rockers was not moving so the spring was messed up in the inside when I took the head apart

JuanRivera-yl
Автор

do you have a video that shows how to replace the lifter

mediaministrydesigns
Автор

Thanks for the video. Finally someone who knows what there talking about.

kirksm
Автор

I had one of these trucks come into the shop with a dead #2 cylinder. The RPM drop test confirmed #2 wasn’t contributing. I checked for spark, it was good, i did static and running compression tests and it had plenty of compression. I replaced all injectors and that didn’t fix it. I noticed the valves were gunked up. I suspected the lifters or the dirty valves but why did it still have good compression? Idk. Never got any feed back from customer.

abochavez
Автор

Any videos on how to fix it ?? Really don’t want to pay 2000 to get it fixed

buttersvisions
Автор

Have a ‘13 Silverado and getting P219A code.
Replaced upstream o2 sensors with denso
Cleaned mass air flow sensor
Replaced air filter
Two quarts of marvel mystery mix oil in gas

TurnThemWheels
Автор

Do you see many that need a new cam too? Thanks

Kentucky-bzpg
Автор

what keeps causing lifter to go bad replaced twice already

MaryBoudreau-mmot
Автор

Did you have compression on the cylinder? I got a issue with a vehicle i have changed everything checked all the wiring have changed plugs wires and coils checked the injector its working properly changed couple sensors and throttle position sensor and still got missfire on cylinder 4 but only thing throwing me is it has good compression.

jamescasey
Автор

What if the lifers are moving an you changed everything an it's still misfiring?

jamielee
Автор

I had the same shit replaced lifter and still have misfire😢

jasonhemann
Автор

2007 Chevy Silverado 1500 liter #7 low compresión

rubensanchez
Автор

Shouldn’t you just change them all since the hood is open 😎

tillman
Автор

So if you are having the p0307 and you've already done spark plug, wires, fuel injectors, coils, and have had new lifters installed... what's the next step 😂

geeteedan