Mastering Pipe Welding: Secrets to Navigating Tight Gaps

What is best for dealing with tight gaps. Grinding disk or a metabo blade? Just getting started pipe welding Or have been welding for a while check this out. I think there’s something in here that will help you. If you have any Welding questions, leave them In the comments section.

Congratulationss on starting your new welding business. If I missed somthing, I have no doubt that I will find out in the comments. Thanks for watching guys Happy welding.
Tips for welding With 6010 ,70+ or 8010 and 7018.

Just getting out of welding school Here's some advice. I hope it helps people starting their welding journey.
#Pipewelding
#pipeliner
#7018
#6010
#RigWelder
#DownhillWelding
It’s important to go to welding school but it is more important to learn how to weld. It doesn’t matter what you do just practice and keep practicing. Nobody can hold your hand. It’s up to you. American Welding Society! Welding schools!
#WeldingSchool, #RodAngle, #TulsaWeldingSchool, #LearnHowToWeld, #7018, #6010, #taylorwelding, #weldingschools

I'm not a welding inspector, a safety man, or your mom. Do your own research. I'm not responsible for anything you do. Have an awesome, awesome day. Stay safe. welding tools homemade

[mitchcampbell]

The 1/8 grinding disc trick and jamming the rod in there works for me every time. Best advice I’ve gotten for a slammed fit and I learned it off your channel. Thanks for making these videos and sharing your tips with us young guns. It’s really helped me out a lot.

[JesseMcCall-onmr]

I can tell you’re a very knowledgeable and solid welder. Keep up the good vids bro.

[Jgabyc]

Keep grinding YouTube my friend I thought you were at 100k subs + I see you getting there soon. Quality content

[terrycapehart]

He's a good welder with a dam good attitude, keep him if you can, good luck.

[SirCarlosMusicBMI]

There is Definitely an art to welding and you explain it very well. So many things that I never knew about.
Wish that I could spend some time with you guys and get to know you better.
Tons of love and respect,
C Los. ✝️🙏❤️😊🇺🇸

[bjen]

These are the videos I like to see. Lots of great information in them. I appreciate you taking the time to make these Chris and if I lived close by, I would be out there with the both of you learning as well.

[gagehamel]

Props to Austin for putting himself out there! Takes some guts! I struggled for a while deciding whether to cut out tight gaps with a disc or soften it with a wheel. I almost always soften with a wheel also. Great tip, thank you for helping us in the trade!

[osbaldohernandez]

man i wish i could learn from this guy real experience and knowledge

[gordjohnson]

Thnx for the grinder tip. I didn't know that, but it makes sense.

[cmthumboldt]

That 6 or 8 inch blade, on that hand grinder scares the he'll out of my fingers.😮

[soringabriel]

Man I like your teachings❤ love the the work you do i am absolvit a welder not a real pro like you but im learning from a pro thanks for your videos 😉

[raymondquave]

I weld every thing 7018 I'm not a pipe Welder I weld up hill, can't see the point in pipe welding down hill, but never tried im a heavy constustion welder, ,, but all in all great educational video thanks

[MBwelding]

😂 keep on plugging away I love your videos I don’t really have a good mentor I’m self taught welding on heavy equipment and making little things to sell at fairs when I was a kid oh and ps I got me a grammar book so I can fix my punctuation errors just for you 👍 expect better comments in the future lol keep on doing what you’re doing

[sidehustlesurvivalist]

On the matabo side at the dead stop--do you weld back behind that first and then grind the rest of that dead stop out? then reweld it?

[mactomson]

Young kids today have it so much easier tons of videos like this All of Old-timers Had to get in the cut

[daver]

So what’s a productive day for a Pipeliner 6” X-ray how many a day?

[tobybaldwin]

Me personally. I like a fether edge with no gap. I will normally weld a joint with a key hole.

[durpfurper]

Out in the field I would have taken a zip disc to one side. Ran a root to the side I opened up, and looked how much the other side opened up after I ran root on the first side. So long as there is a gap, I will soften accordingly.

I'm not the biggest fan of softening a jammed up fit but ill roll with what ever is in front of me.

If your slammed up your only options are soften or open it up with a zip disc.

Good luck putting a good root on a 12" pipe that is slammed up 100% all around by softening. Learn to do both and balance accordingly. You are usually only slammed up for a 1/4" or so at a time, here and there.

[BrendonSmith-hw]

Old bead hand told me, if you can see daylight soften it up. If you can't, Metabo it

[paulmeersa]

Do you know why they are two different things..?