Honda Accord front wheel bearing DIY replacement press in at home hand tools. GEN 8

How to replace Honda Accord FRONT wheel bearings. No hydraulic press or machine shop needed!! It's actually an easy job with the right tools. Front bearings are the harder press in kind.
This was actually filmed on a Gen 8, 2011 Accord Coupe. Fast forward through the real time slower parts.

[Wokemindvirus-a]

Man! Very informative . Keeo making great videos. Will subscribed. 👍🏽. Thank you.

[troymckoy]

Thank you so much for saying that the race is leftover from the old bearing. I thought it was a separate part. Only you made that clear!

[JTapia]

Damn bro. Good video. Can't believe all the hate you're getting for just showing how you do it. Big props by just using a freaking open end wrench to get that bearing in.

[TomAustin]

God bless you! That picture wire trick was EXACTLY what I needed! Neither of the two snap pliers I have were strong enough. I uses a vise-grip instead of a c-clamp. That you!

[theniceneighbor]

I bet if you check every dads toolbox mist of them have that same craftsman ratchet. Lol😂 i was given mine in high school and im in my 40s. Still works great.

[greenmagicman]

The only power tools used were a $9.99 angle grinder and a friends Kobalt medium strength impact gun with air compressor and I only used that to remove the wheel spindle nut quicker. I suppose you could use a hacksaw and a very long cheater bar on the end of the 36mm socket.

[staypositive]

Wow! This is an excellent tutorial and answered all my questions. The only part I didn't like was the handing of the clip ring. You can get clip ring pliers for pretty cheap and not risk getting smacked in the wrong place by a flying ring. Great job overall!

[JohnT]

What brand wheel bearing did you use? I notice even the name brand ones nsk, skf and timken are all made in china now in 2022. They once were made in usa 😅

[kaospow]

Nice vid. Only time I cringed was seeing you press that bearing in using the open end of that wrench . Great job though thanks for info doing this . Now I see what I'll be up against when I tackle this job myself.

[martinosvath]

I love that you don’t mention what year Honda accord that we’re working on

[pizzamon]

in hindsight you want to break a lot of those bolts and fasteners lose before you go take it all apart.

[datruth_]

I get a humming noise like I'm inside a plane is that the wheel bearing? issue?

[Dhldakram]

I just buy the whole knuckle loaded with the bearing and a lower ball joint, so much quicker, has a brand new backing plate, mine was rusted off

[mr.nobody]

So, 8 Gen Honda Accord front wheel bearing replacement on a Mazda Car?

[ethercreatures]

I am wondering why you didn't use the impact drill on the handy work with the manual press? Seems like an idea to me although not a mechanic.

[dustyroads]

Take the caliper and roter off first, its easier to loosen bolts, and less weight on the spindle, and brake line.

[pizzamon]

I have a ball joint removal tool that i use for the upper and lower ball joint and the outer tie rod end. It was $15 on Ebay

[pizzamon]

I just unplug the cable for the ABS wheel sensor inside the engine bay. Mine are completely seized in there

[jessez]

I have a 2000 Honda accord that I'm about to do the front wheel bearing but when I got the new bearings they dont have a magnetic on either side but my car has the abs sensor so now I'm lost and dont know if I should I install them or what side should I put them in or would it matter?

[bobbofly]

Your center cap on that rim has a Mazda symbol...