How to Replace Driver Side Front Wheel Hub 2008-2012 Honda Accord

Buy Now!

This video shows you how to install a new driver side front wheel hub yourself on your 2008-2012 Honda Accord. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord

Tools you will need:
• Ball Joint Press
• Hub Puller
• Pliers
• Snap Ring Pliers
• Bungee Cord

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ Watch the Video
√ Do it Yourself
√ Save Money

[davetremain]

Man, this looks like a lot more work than I anticipated. 🤣

[davesmith]

The best thorough how to video on Youtube.

[Adlamo]

why do you need to loosen the bleeder to push the caliper back in. Can't you just push it back in and it will push a little fluid back into the fluid reservoir?

[jamesburton]

Need to replace a wheel lug stud on front driver side. Will i need to do most of this to get to the stud?

[Arthur-kevz]

How do I know if I need the bearing and the hub? Thanks

[LazaroAlejo]

No one explain how they got hooked up the master wheel bearing remover to the axle nor which of the many different tool they used

[randyvalenzuela]

Amazing video easy to follow keep it up helped out tons

[JuanVega-nsok]

16:45 Not the way a castle nut and cotter pin should line up. Something is wrong.

[loufromdabx]

Can you just remove the caliper bracket? Or do you have to remove pads and caliper?

[ramonmoreno]

Looks like he had to replace the wheel bearing as well because part of the bearing came out when the hub came out.

[GladenofAsgard]

Let me just use an impact driver on a rusty bleeder valve. It snapped off! 🤡🤡🤡

[tommoland]

Notice that he's putting on a new nuckle and not the old o e hmmm

[rpasco]

The title is 'How to Replace Driver Side Front Wheel Hub 2008-2012 Honda Accord', NOT 'How to Remove the Complete Driver Side Front Knuckle Assembly to Simply Replace the Wheel Bearing' ! It would be far quicker and easier to REPLACE the entire complete knuckle assembly for $150 in parts: New bearing, new hub, new speed sensor protection rim, new lug bolts! NO OTHER DISASSEMBLY/REASSEMBLY REQUIRED. You just showed that it takes removing only 2 nuts to completely remove the entire complete knuckle assembly. Sheesh !