Ping’s Secret Driver Setting!

#golf #ping #g430

This setting on the Ping G430 driver will help to try and take the left side of the golf course out of play. Stop your hooks!

[jerryzimmerman]

I did today! Not only was it straight, and effortless. Thank Mike, short and to the point. 0:26

[lesliekahan]

Thank you so much for this short and sweet tip! For most of my life I've hit my woods straight, but recently started going left all the time. Instead of changing the swing that I am very comfortable with, all I did was switch the driver and 3 wood setting and bingo, I'm straightened out and hitting far again!

[aliasErEf]

Thanks Michael…you are the only one making a simple tube on how to set up the F fonction….( quiet simple I NOW understand)
Thanks
ErEf, Montréal, Canada

[limey]

Cant someone do a video on the effect of every setting on this club? This was way to fast a clip to have any impact on me to be honest.

[johnmurray]

Michael, hoping you find time to answer 🤞 I changed this and cannot believe the difference. I was aiming right side of fairway as 2 out of 5 would go too far left. Not the end of the world, I normally either hit right side or of it pushes left I hit left side. Drives are now going straight. Firstly thank you, buy HOW? What is it that this has changed? Cheers. Happy follower.

[mugz_]

Like to see a TM version of the sleeve please, most of us don’t actually understand how the sleeve works on are drive. I have the m4 from a friend it’s 12 degree (to high) if I dropped this to 10 would my face be closed or open🤷🏻‍♂️

[keiko]

What to do if like me, I am left-handed
Thanks

[chriswright]

I been using this for a while, -1 degree flat irons, it works

[markantiss]

What if your miss is to the right mate

[Shawn-ebyz]

What if I'm left handed slicing left?

[Crinklidge]

So I've heard that changing the lofts on drivers like this is also changing the lie angle. Which way is which?

[chrishamilton]

Shouldn’t it be on the - flat not the + flat as u changed in the video as I miss to right but used - flat setting ?

[TBHammond]

If i have the Ping G425 and fade to the right, what would you suggest i change it to please?

[petermarron]

I can’t remove the head on my new G430 max 10K I’m afraid to force it. Any ideas?

[stuarthill]

What if you’re a lefty?? Please help 😕

[toddp]

There is an interesting you tube guy who has a decent channel (can't recall his name) but basically says the 10k miss is right and proves it out. Btw I have the same experience with it. Very hard to hit it left (assuming you have the right shaft for you) versus other drivers heads with the same shaft.

[larrybraswell]

My miss is to the right... is there an adjustment for me... talking slice here... and not pizza. Going to the large - seems to have helped some.

[Sergeante]

Hmmm, I have a couple of adjustable drivers and a caliper. I measured all those hips and valleys (length and width, etc..) in each club and I found absolutely no change in measurement. Meaning no change in anything, unless you hold the shaft at the same point and change the club. But that will either open or close the face, so, I guess it will change loft and lie a little bit. BUT SO WILL SIMPLY GRIPPING SHAFT STRONGER OR WEAKER OR EVEN JUST CLOSING, OPENING, ETC... THE CLUB BEFORE YOU GRIP IT.

I AM SAYING THOSE ADJUSTABLE CLUBS ARE A SCAM. 🤷🤷🤷🤷🤷🤷🤷🤷🤷🤷🤷🤷

[vinebutton]

Who are these freaks that miss to the left

[EFFTrudeau-]

Secret Ping? Literally every driver has a flat setting