PING's Trajectory Tuning 2.0 Adjustable Loft Sleeve

[peterduffy]

Great explanation. Finally someone actually explains what the 3 flat settings mean. Ie they are all flat and the plus and minus adjust the loft.

[KeithWhittingham]

Great! That's what I needed to know.

[Nupe]

Excellent tip. Just what I needed to see.

[theliftexpert]

Excellent video, but you should also tell the viewers that adding loft will promote the toe to be closed to prevent some fade spin and decreasing loft will open the face and promote more fade spin .
If your miss is right you should buy the correct lofted driver and add loft .
If your miss is left you should buy the correct lofted driver and decrease loft .
Cheers 🍻

[lacabala]

A discovered this Channel today. So much useful info and deserved more subs. Keep going!

[FKNSENDIT]

Just a thought. That seems like the shaft would not ever get memories, other shafts has the cog that spins so over time the shaft is always the same an gets memory an a straiter bend every swing .if u use the ping shaft setting for a year then rotate it youll probably hook or slice real bad cause the shaft is slightly curved, i could be wrong but it makes since to me

[davidlove]

You've simply pointed out out what anyone can see. The question is WHY do you make these changes and what are the results from each change.

[mdunhamful]

Great video. Very understandable. I Just bought this driver and am slicing it right. What adjustments help that ??

[KevinVanic]

what do you mean flat? i have sft and my miss is left, can i use the flat setting to have it go less left?

[gimbalair]

I don’t understand where the 3 degrees of adjustment come from, or is that the spread, whereby the max adjust is actually only 1.5 degrees up or down.

[BoilerTimmay]

How many degrees flat are the three flat settings? Ping just says “up to 3 degrees”

[nickhines]

I want a ping g420, don't care if it's used, but will only buy it once I can hit it at a real driving range.

[SmoothE]

What setting should I use. I have decent club speed but can’t get ball up in air much, just line drives

[No_Fear_]

How do you take the head off? I lossed the whoel screw until it feels like its floating in there and the head wont seperate from shaft

[ronrund]

Great video! Will increasing or decreasing loft change the face angle?

[AP-tjkg]

Can’t seem to get the head off the shaft. Loosened the screw completely and the head still won’t budge!

[Fighting--Par]

But does the face angle change if you loft up? I thought when you add loft, it closes the face?

[nickhines]

Ok loft and lie is changed on flat setting but the face angle doesn't change, I prefer flat lie with 1 degree open face. The face angle is more important than loft and lie angles.

[martinandersonproperties]

Please try and remember that you have left-handed customers. Your comment about the flat settings keeping the ball from going "LEFT" are only correct for a portion of your audience. thanks

[mootrail]

Will this sleeve fit into older heads like the G400?