Marlin Firmware 2.0.x Explained

This is a brief tutorial on some of the capabilities of Marlin Firmware and how to configure.

One Time Tips, You Can PayPal Me:
Discord:
buymeacoffee:
Patreon:

Software:

[dammitimmad]

need this a week ago just switched to"insert can of worms here: Lerdge" thank you for your contribution and taking your time to post a walkthrough!!!

[als]

Great Video ! The Min temp in line 459 ( 24 minutes ) is for the room the machine is in, it won't start below ( default ) 5 degrees C

[MirzokhidMukhsidov]

Hello, couldn't find the "Need to ask a question? Look here first". Can you give me a link to it, thank you in advice.

[martinswanepoel]

I know on the Ramps1.4 you need to replace the poly fuses and remove diode 1 to make it work with 24V. Can the Ramps 1.6 do native 24V and are the fuses rated for 24V ? All the diagrams I have seen say it is still only 12V rated. Please give some guidance.

[bunnykiller]

awesome info... wish you had done this video months ago, it would have saved alot of people alot of confusion on understanding the process and design of these boards... This is an AHH Haaa moment for me, everything just fell into place for me... keep up the good work.

[papamidnightfpv]

This video is great, several of your videos have helped me rebuild my anet a8. My first experience with Marlin also my first build. Only problem I'm still having is it resets when the bed gets over 30c. Not sure why it happens but I've been able to trouble shoot everything else so far.

[hopeful]

great tutorial thank you so much, , it was soo usefull for me and learned a lot i really appretiate your efforts thank youuu

[BrettCulley]

thank you for your video's i now have both my cr10s printers using the BTT 1.4 Turbo Boards. i have been around 3d printers for a couple years, but one thing i have never been able to get working is ABL. I don't want bltouch, i prefer the the other sensor, hopefully you will do a video in the future. thanks again.

[dunglevan]

Hello, thanks for your tutorial video. But can I ask you a little bit, currently I am assembling a diamond printer for mixing colors. When I got to editing marlin firmware for it I got trouble. My printer has 3 extruders and when "Mixing extruder" is turned on the caption says that only 2 extruders are allowed, and should I enable "#define SINGLENOZZLE" for my printer? Hope to get your help: D

[iancuadrosdiezbarroso]

Very nice video bro!, thanks for your content

[n.b.]

HI printers, i need help, i use marlin 2.0.6. when i make a G28, my nozzle goes out of bed on y an x and nozzle does not go in middle of my bed.
really need help, three days i try day and night.
card: skr 1.4 turbo

[iTechCan]

Hello, can you help me out about Marlin 2.0 for MKS LCD12864A V1.4 screen, my board is SKR v 1.3 I watched your videos and tryed to make it but it's just shining.

[gurumultitask]

great video, Anyway my marlin 2.0x setup to MKS Gen L and Platformio.ini setup to LPC1768. when uploading is filed like showing Upload_port or Upload no target or Target no disk. can you help me?

[RaminOhebshalom]

Could you please look into upgrading the firmware for the Geeetech A30T to Marlin 2.x

[АлександрПаздников-лл]

Доброго дня у вас есть субтитры на русском языке?