How to make a GY6 faster

If you have done all the basic mods and just want more top speed, this is the kit for you:

[ArcadeCabNBud]

ive been following your videos and my 50cc now does 70mph, and thats just from watching your videos, thank you

[rdooski]

Something that should be mentioned is wheel size because its a big factor. A scoot with 10" wheels should be addressed with different gearing than a scoot with 12" wheels. The difference between the wheel size and top speed are both about 20%. And a 20% lower ratio is about the most most you can get out of a gear change. So a engine with stock gears and 12" wheels is going to have about the same acceleration/top speed as it would with 10" wheels and a 20% lower gear ratio swap.

[jazznelsalica]

even if it is for years ago i watch this because i want to learn more about gy6 engine, i build 125 china gy6 now good job bro keep it up thank you for the knowledge, watching frm Philippines

[Mrgonzoghost]

Just purchased mine.. cant wait to see the difference

[techunfiltered]

The content that made me first find this channel was genuine performance content. Now its just infomercials for stuff u selling, without any verification or performance tests shown.

[Cacique]

Hey bud. Quick question. I bought a go kart with a gy6 engine advertised as 200cc. The specs on the site says 169cc. My question is, how do I know what I have? And if its 169cc, what upgrades can I add to it to make it faster and possibly produce better tork? Thanks in advance.

[socksonfeet]

I've never modded any of my gy6 motors but this seems to be the better mod out of all of them. I've played with sprocket sizes on bicycles and motorcycles. They can make all the difference in top speed. How much is the set going for?

[shox]

What's the difference between the 15-37T kit like the one in the video and the 16-38T kit you sell online? For a stock GY6. thanks

[PetroLarsson]

Or like I did, install a taller tire...

[b-wiser]

Great videos 👍 question what gear size would I use for a 150cc Chinese motor with a 171cc bore kit??

[cartsquads]

Will this work on the trike version? I have the 2022 150cc Maddog Ice bear.

[jedediah]

Will the 150cc gears work for a 50cc with a big bore?

[costopre]

Hey just wondering where you got, or how you got your engine to a 232cc? i currently have a 150cc gy6 on my maddog, and am looking for a bigger engine, thanks🙏

[glennhertel]

What Gear would you put in a Tao Tao Pony with a 50mm big bore kit? I would defiantly buy it.

[lioguada]

Hello, your video is very good, thanks for sharing it, I have a gy6 with a high-flow filter and a little richer fuel, what size do you recommend for my valves? My idea was .004 intake and .006 exhaust. thank you

[tobin]

Lube before pressing? Or maybe put certain part in a freezer first? Awesome product btw

[spinnanz]

Instead of using a rod it whoever to press the last part out, use the new gear so one falls out and the new one goes in.

[fitzwater]

I’m thinking of doing this to a 2020 TaoTao pony 49cc scooter. 4-stroke Qmb139 52T-15T final drive gear Is all I’m currently seeing online. Is this going to give me better take off & top end then stock. I’m not sure what exactly stock even is. Does your site have a better one possibly? Very interested

[Krotos]

Great video, but do you lose acceleration when you gain top higher speed?

[carlmoore]

Would this work for a go-kart that has a GY6 in it?