WHAT IS THE BEST ANGLE VALVE quarter turn or multi turn

Today we will talk about angle valves. In this video, you can see what types of valves can be used and what you should choose for your home.
Some people believe that the best valve is the one that has lifetime warranty, but we want to walk you through the pros and cons of the most popular angle valves and help you make the best choice.
Subscribe to our channel for more useful information!

📞 Call us [phone] and get FREE Estimate

Timecode:
00:00 what will we talk about
00:20 about types of valves
00:55 1/4 Turn valve
02:26 1/2 in Nom Comp turn valve
04:33 full turn valve
06:49 dahl eco valve
08:39 which valve should be chosen

[louiswhite]

I am so glad I watched this because I am renovating my house and wanted to see how those valves work. I'm going back with the old school valves that are there now. Thanks. Great video.

[ImperialPainting-htql]

Just bought 20 quarter turn valves from from HD, returned. Went back to Amazon quarter turn BALL VALVE made out of metal. They work great

[FHOFHO]

Thank you, sir, for the demonstration and your honesty☺️

[aslo]

The old Brass Craft full turn angle stops lasted 25-30 years.
The stem was solid brass.
They remade them not to last as long.

If you were to manufacture them again you could make a lot of money.

[debbie]

Thank you - I'm going with your choice.

[krungtape]

I completely agree with you sir👍👍👍 Thank you!

[realdadgaming]

Very Informative! Kudos to you and your channel!

[aslo]

People think 1/4 turn angle stops are made like a regular Brass Craft Ball Valve like we use on a water heater or main water service.
You should cut those valves apart and show the difference.
Please!
Great video

[garykrell]

Brass craft and Eastman are good makers of angle stops

[fabiolalopez]

Thanks for sharing your experience. I've never done any plumbing, but now, I don't have $ for a plumber and I'll try to do the job myself

Thanks for your honesty and sharing your great knowledge! I wish you serviced my area, I’d call you right now! 👍👌

[vinniegugger]

Interesting how water quality has such a different effect on the valves i have very different experience with all of those

[agostinodibella]

I kind of believe that anything made today does not have the quality of the products made 30 or 40 years ago.

[rogermoeller]

I have had the exact opposite experience. I would never use full turn due to the stems leaking and them getting stuck. If you buy a good quarter turn that has a stainless ball and stem they will last for a very long time. I put them in my house 20 years ago and they still work perfectly. I am doing an extensive reno and had to replace a pair and used brasscraft. I sweat them in place being careful not to get them too hot and now they don't shut off due to shoddy materiels.

[Splattervision-qhsd]

No 1/4 turn valves for me. Another reason to avoid them, they can’t be repaired. You can buy a rebuild kit and put new seals in the multi turn valves without removing the valve body. Now you have a new valve and you didn’t have to shorten the pipe stub coming out of the wall to install a new valve. Most homes, you only have enough pipe / tubing to cut it once or twice to install a new valve. Just leave it alone and put new seals / stem in it.
I can’t figure out the desire to go to 1/4 turns. It takes 5 seconds longer to close a multi turn valve….who cares?

[TheTruth.K.J.V.]

The old brass stem multiturn stems were great and lasted forever. Even had replaceable gaskets. The new plastic stems FAIL over time due to the chorine in the water. Mine have about 10 years and SNAP OFF when trying to tighten down or open. None are perfect. Where possible I always get brass stems in 1/4 turn. AND make sure the main WATTS type 1/4 turn valves are ez to access just in case or just turn them off and use the smaller valve to limit the water in the lines from coming out...even under no pressure.

[ANewEvilRising]

So they don't make em with metal casings so it won't get scratched shit ready on the inside?

[sbc]

BrassCraft copied Dahl. Anyone who knows the Canadian market knows this. Dahl makes the best supply stops in North America.

[mikedoingmikethings]

I am here searching about the “quarter turn angle valve” because it is clogged. Our house is only 6 years old and it already failed! He is right, the quarter turn angle shut off valve is junk!

[levelstolive]

everything old school was built better.