How to Replace Front Knuckle Assemblies 2014-2019 Toyota Highlander

Buy Now!

This video shows you how to install new front knuckle assemblies from TRQ on your 2014-2019 Toyota Highlander.

This process should be similar on the following vehicles:
2014 Toyota Highlander
2015 Toyota Highlander
2016 Toyota Highlander
2017 Toyota Highlander
2018 Toyota Highlander
2019 Toyota Highlander

Tools you will need:
• 22mm Wrench
• 30mm Socket
• Tie Rod Puller
• Pliers
• Wheel Chocks

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ Watch the Video
√ Do it Yourself
√ Save Money

[d.thomasvanpelt]

Anyone trying this job should know that the axle nut does not come off that easily. It will likely be staked in place and you can easily damage the threads on your axle if you try to force the nut off. The axle nut must be cut very carefully in order to weaken the point where it is staked so it can be removed without damaging the threads. Also, tie rods and ball joints do not come out that easily either. A video showing the job being done that includes these complications would be helpful for a diy guy who starts taking apart his wheel assembly.

[chriswelch]

Thank you I was wondering if it needed to be aligned or not.

[enriquesotelo]

Is the install similar for a 2013 Highlander?