How to Replace Front Knuckle 2003-2008 Toyota Corolla

Buy Now!

This video shows you how to install a front knuckle on your 2003-2008 Toyota Corolla.

This repair was done on a 2008 Toyota Corolla S 1.8L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla

Tools you will need:
• 19mm Socket
• 21mm Socket
• 3/8 Inch Impact Gun
• Swivel
• Anti-Seize Grease
• Safety Glasses
• Hammer
• Punch
• Wheel Chocks

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ Watch the Video
√ Do it Yourself
√ Save Money

[gameondude]

Bought these and their suspension kit fit great no more loud humming from the hubs and wheel no longer rocks back and forth

[davida]

Nice quality parts no need to press wheel bearing or brake dust shield. All in one part super easy to switch out. Thank you Wished they provided a block off cover when you font have abs. Open access to cv axle causes more corrosion imo.

[bifurkacia]

Very high quality and straight instructions with great visuals. Seems like you need quite specialized equipment to do it DIY.

[I-sed-no]

Best video on this topic for this year/make. Bought the two knuckles from 1A and will be doing the work this weekend on my '08.

[ernesthawkes]

Is this part number the same for a Pontiac Vibe?

[Jt_]

So can you still install the steering knuckles with the abs sensor even if your vehicle didn’t have a abs sensor

[joeharvie]

Excellent video.i ordered a new ball joint. It has a grease nipple. Do I grease it before or after reassembly?

[craigcampbell]

Question. When you hammer socket on a castle nut because the cotter pin won't come out how do you get a new cotter pin in with the old pin still in the stud. Loved the video. First loaded knuckle job. Saved lots of $$$$

[mhiggins]

Do you need to get an alignment after replacing the knuckles?

[humbertothebeliever]

Nicely done. How much a job like this cost?

[andrewmbrackett]

Is that a metric or imperial sh**-ton of anti-seize?

[ryantogo]

Good video but I don't agree with anti seize on the mating surface between hub and wheel. It's the friction between the two dry surfaces that resists shear force on the studs.

[mongopoe]

My cotter pin didn’t break off. Just got stuck inside. Nothing worked lol, I’ll be needing a new outter tie rod. Oh well. Before I continue I realized I need to account for every single tiny fucking part. It’s a rusty ass, old car. Fair enough. There’s ur warning