Learn how to do a Wheel Swap! No Drilling and No Glueing!

I been doing a lot of wheel swaps and I wanted to share the easiest way I learned to do a wheel swap. This way you don’t need a drill or glue. It’s nice and clean and a lot of fun! Comment down below what wheel swap you’re going to do first!
#hotwheels #hotwheelswheelswap #wheelswap #hotwheelscollector

[injairgun]

I have doing the non drilling wheel swaps for quite a while now, people just don't understand that unless you are painting the car and or detailing the interior then there isn't a reason to drill the posts! Those Aerodisc look great on that NSX! The bend is a great trick it also allows you to swap wheel again with the mess!

[ShawnStafford-]

Awesome. I usually save my original wheels and like swaps without drilling out the vehicle's

[rajivvishwakarma]

What are both sets of pins called, and where did you obtain them?

[TRD_Cueto]

Excellent video. I usually drill, tap and screw mine back but I love this process. Where do you order your axles?

[murkinit]

Best method I’ve seen for protecting the car’s original integrity. Love this so much!! Great job and video 🫡

[Docdug]

Nice monochromatic look! Great instructional video!!!

[JohnWickOG]

I have a few 935's & 911's to do thanks to this vid!

[thejokerskc]

I have a 2018 camaro I wanted to change the wheels on this is going to help so much with the modding process and journey

[ginotiraboschi]

Nice one question? Can you do it on Hobby Japan brand 1/64 like the yellow MR2 you reviewed? Thanks ...

[DJfireantplus]

Straight to the point. Love it. Thanks bro✌

[Jonnywon]

Are you able to te use the wheels putting them in other cars ?

[PITORRORUM]

That size of the axle are like universal for all hot wheels or i need diffents axle sizes?

[danielmingea]

Have you found another way to secure the second pin on each axle? It is hard to squeeze each side at the same time without slipping. I can’t find a tool that works.

[ShdowVRR]

What are those pin pushers called (tool)? The one that you used to push the axle ends in. Any help appreciated.Super cool video.
I paint cars if anyone has questions regarding paint work.
New subscriber here. I will try and follow your advice. Me and my little guy did one but it did not come out properly but we did not have axle tubes. I want to try with axle tubes and see how it comes out. Thanks once again

[dzaaaaan]

DUDE, i think i bent it way to much, can i just like re bent it the other way so i can use it? like at firat it has no traction and it just fell, when i bent it a little bit more its too much, tbh a hard thing to do

[jonathangonzalez-vfio]

this method works with rubber wheels also?

[Sarinchi]

What is the name of the tool you used and where could I buy it?

[BillyBob-oplg]

These seem like they would fall apart easily?

[derianruiz-hernandez]

Use a small punch with the diameter of the axel rod and a small hammer but other than that good idea

[alaskamc]

This is the "best" system if you aren't painting the car.