How to Change your Fuel Line Assembly

preview_player
Показать описание
Shoreline Marine presents "Captain Weekend", Loye Futch, a 25 year veteran of the marine industry and professional boat mechanic, who will demonstrate how to change your Fuel Line Assembly.
Рекомендации по теме
Комментарии
Автор

Agree, please post a vid installing inline filters, thanks.

wrthrash
Автор

I have a new Suzuki 70 hp and want to put my tank in the bow. I need a long fuel line. How do I know if I'm getting the right one?

theodoreerickson
Автор

should not use that teflon tape, Does not tolerate petrol and disintegrates in to small bits that can get into the fuel system.

swedishkev
Автор

My old Honda 10 fuel line connector is leaking at the engine, causing fuel starvation. I can’t find a new replacement female connector that matches the male on the engine. Should I try replacing both male and female connectors for a newer Honda design, or do you advise another solution?

skipjohnking-montaguwhaler
Автор

i was told the grey fuel line is not ethanol compatible and it will deteriorate and plug up your filters

kc
Автор

What size fuel line do you recommend for a 90 hp yamaha, I moved my gas tank to the front of my 17 ft boat. Would a 1/4 inch line work?

Cronicbubble
Автор

Fantastic video i have the plastic fuel tank on my Yamaha tiller steer can i run the the fuel tank up the front of my boat it would be about 9 foot from motor if so where do i put my priming bulb near tank or near the motor for priming fuel. Thank you

Farmer
Автор

Well this video was done halfway.   It would of been nice to see him install the fuel filter and the water separator unit. 

maizinblue
Автор

Can you recommend a way to add a fuel tank to the one I already have for my outboard? Thanks

drlangattxdotnet
Автор

That's a nice 25 merc. It would push my 13 whaler perfect, my little 15 merc 4 stroke doesn't have the balls to do it lol

Whalermansteve
Автор

Don't use that gray fuel line. It's garbage. The liner will deteriorate cauing bogging. Use automotive fuel line and you'll never have a problem. EPA is ruining everything these days.

MN_Angler
Автор

My fitting on my 9.9 Johnson is leaking how to change it

JackJackson-mbwr
Автор

What about replacing the fuel lines on the motor? Do those wear out sometimes? Also is it possible for the vent on the gas tank cap to clog?

joshwandrey
Автор

all those pre made silver hoses are terrible with the plastic liner going bad

ranger
Автор

good video but do not use the white teflon tape. Use yellow teflon tape or pipe dope that is rated for fuel

JHack
Автор

My marine dealer installed the fuel line on my tank . I’ve had numerous problems with gas flow and i notice that the fuel line itself has arrows on it and they are going towards the tank but my bulb is going towards my engine. Doe’s the line itself needs to go in one direction?

bowkiller
Автор

don't know how old this video is but, don't expect any replies from the poster.

rjl
Автор

went to sales site= only wanted get rich /saleing huge boats= no parts from search area!!!

booger
Автор

No real marine mechanic would suggest using that grey fuel line. And never use teflon tape on a gas fitting. It deteriorates and turns to goo.

JasonLefevers
Автор

don't use any aftermarket primer bulbs. They are garbage! Attwood and others have only 1 check valve and the ones they use suck. Get a Mercury, Evinrude, or Yamaha primer buld... you'll thank me later I promise

jimbogasoline