How To Install a Starter Rope on a Honda Recoil

[rbarr]

Nice and straightforward. For all those asking what size of rope -- my GX Honda uses #5, which is 5/32". This works out to almost exactly 4mm. You can measure your existing cord and it should be close. You can find Stens in various sizes, cheap enough to buy a hundred feet and be set for a few years.

[darrellrandall]

it is better to wind the spring first. you wind it up till it won't wind anymore, then Un wind 1 full turn. put a screw driver through it to lock it in place. then tie the rope. the machines at work do this process, I actually work tying these together. we make the knots in the rope one handed. we tie around 300 parts an hour.

[ChannnelTiny]

Great video, concise and your tutorial worked perfectly! When I searched for how to make this repair there are so many videos that are 8+ minutes long which, as you have shown, is a complete waste of everyone's time. I only went to the 2:00 mark and your instructions were so clear that's all I needed! Thanks again and keep up the good work.

[patl]

Do you know what size the rope on a Honda GCV 160 27, 000 psi pressure washer is

[lynnhoward]

was good. but wasn't clear on how long the rope should be and what type of rope to use

[ajoymondal]

Friend I am an Indian from a remote village farmer. Tonight I had no option . I had to repair the machine. No mechanics will visit me at night 11 o'clock as it is village and am two miles away in the dark night. To catch fish by pumpming out 💧. The machine I opened but only your video help me to coil the pulling rope. Thanks this is the real help

[Jerseyhighlander]

Any size rope at all? #3? #7? doesn't matter? 24" long or 23 feet long, who cares?

[michaelsaint]

THIS IS NOT HOW TO INSTALL A NEW ROPE PLEASE GO TO HONDA SCHOOL TY

[stevegabbitas]

Thank you! VERY VERY helpful -- done in no time.

[bartmobilevaleting]

Thank you for your instructional video! It helped me 100 percent !!!

[joehamilton]

This Honda GXV 160 has a metal cage around where the spool sits inside & I can't wind the rope like you do to set tension

[rickyrocket]

could you make a video on how to replace the ratchet pins on a GX 390 inside the coil pull. Mine backfired so violently once on a pull that it bent the pins beyond repair. I purchased new ratchet pins but don't know how to install them.

[irish]

How long should the rope be ?  I had some rope to cut...

[RonTheHorseman]

Thank you for this video, i didn't know how to do it, and now i know...
Greetings from France..👍

[LMillion]

Yoooo I did that shit!!!! .... bet 👍 thanks bro .... that was knowledge time n money...

[tashmuthama]

Thanks bro, ,I HV to repair mine which has been broken for a while now, , and I like your shave

[kaneneale]

Were 2 put a frotoll spring on a honda hr173 lwa96 type ma2r please helpful

[jodiyadu]

don't make the knot too big? yes make the knot big otherwise it can slip back through the hole.. thank you though

[bbajwa]

Easy to understand and very helpful. Thank you uncle 👍

[konNOS]

My spring wind up only half a round what the fuck is going pls help me, i cant work tomorow