DIY Electric Scooter Conversion full video # Technical Partha

How to make a electric scooter
I am using 48v 750w BLDC Motor & controller
battery 48v 35ah lithium ion

[adityavardhan]

बहुत ही शानदार कार्य। दिल से सैल्यूट है
कम खर्च में ई स्कूटर मजबूत सर्वश्रेष्ठ सफ़ल परीक्षण किया है आपने।

[ralger]

Love it very good recycling of old gas scooter, we need more people like you to save our planet 👍

[ats-]

This is well done, but i think you need to take out the original crank shaft and replace it with a straight shaft. The original crank shaft is designed to balance the reciprocating mass of the piston and con rod, the piston and part of the con rod have been removed so now it is out of balance and will vibrate.

[ajazmaqboolofficial]

Add engine oil to the crank housing for lubrication, otherwise crank bearing will cease soon.

[JasimChaudhuri]

Innovative. Necessary for us to find such alternative ways for mobility.

[Leo-dorf]

I very like this idea, this is brilian idea very good, me from Indonesia

[chaitanyathupili]

Good idea and easiest way to convert
Even if you have used a shaft instead of crank shaft will be able to reduce vibrations which will come from crank shaft
Keep doing and keep inspiring us

[marcbrasse]

I already found your choice of the donor bike with its thoroughly proffesional slick already inspiring but seeing you flex off that big end really did it for me. The thing will be totally out of balance. You think I can actually hear it rattling during use. Very dangerous! This is a BODGE JOB that deserves all the capital letters. An A for hands on minimalism though! :-)

[jashall]

I've seen a cuple conversation and this has to be by far one of the easiest methods in my opinions

[venkataswamyg]

Instead of crank shaft cutting you could put plane shaft wound be fine, vibration and weight could be reduced.
It sees that performance is so good . keep it up.

[aswin]

An electric motor with cvt
The torque is gonna be Bananas💥

[carlospoor]

Very, Very, nice idea, well done Diy, only few details, when You mounted the plate for the motor, You left many openings for dust and Water to enter in the cavity where the former crankshaft is that will ruin the berings, You should seal it also the area of the chain that goes to the wheel, but great job, the best to you

[ajitsinhsonofsadashivbabak]

Your hardwork is awesome constantly you use minimum requirements of outside parts of engines finaly you got it alteration

[pat]

Great effort loved however to increase the efficiency and reduce noise.
.
1.clutch should have been excluded and a direct coupling should have been established,
2.motor to gearbox connection should have been done with a drive belt to reduce chain noise and the chordal action of the chain
3. rubber bushes below the motor mounts to dampen any noise.

[irontaft]

Once i get started with my new job, i'll buy myself an old, non-working scooter and modify it the way you guys did. Albeit with a longer mileage. Also, an improved mounting on the cvt so as to prevent any damage to the motor as well as retaining the stator to provide additional power to the batteries for longer trips.

[rp]

Very good please show the speed and average per charge in every video

[type]

Love the Innovative Spirit, I feel that's what's needed in this world instead of Capitalism...but mainly these SOUNDTRACKS bro! Reccomend them too me if you can. They really grabbed my attention. A+

[LuisTeixeira]

Maybe a more direct path between the electric motor and the wheel would have been ideal. Coupling the motor directly to the transmission belt that is protected in the casing for example, and get rid of some parts.

[DomVito]

Electric motor with cvt system is smart. More torque, plus efficiency. Better for the batteries .

[shockblaze]

Расход будет большой из-за вариатора и сцепления. Но если на дальность хода и скорость пофиг, то отличная самоделка