How to Replace Front Sway Bar Links 2000-06 Chevy Tahoe

Buy Now!

Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle. This video shows you how to install new TRQ sway bar links on your 2000-2006 Chevy Tahoe.

This process should be similar on the following vehicles:
2000 Chevrolet Tahoe
2001 Chevrolet Tahoe
2002 Chevrolet Tahoe
2003 Chevrolet Tahoe
2004 Chevrolet Tahoe
2005 Chevrolet Tahoe
2006 Chevrolet Tahoe

Tools you will need:
• Pliers

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

[vincentforsberg]

Be nice if y'all did videos on rusty vehicles

[ericksmelendez]

Awesome video thanks .. You are an awesome teacher...

[johnnykeith]

I used a ratchet strap instead of a buddy.

[Ryanmoody]

Could I do it without taking the wheel off or jacking the vehicle up?

[jeremyhildebrandt]

Thank you for this video I looked for a while for the torque spec.

[roltyd]

Do the front tires have to be off the ground?

[jfg]

Is there a conversion for the inch pounds to foot pounds? I have a really cheap torque wrench

[Fhqwhgads]

Great video. Really helped refresh my 06’s full front end suspension with your other videos

[MrJacobCastro]

I put the bushings upside down, does it matter?

[tomjoad]

URGENT !
I just looked at mine ('03 chevy tahoe LT 4x4) and there is not bolt nor nut on the top and when I'm using the wrench on the lower bolt, it just make a squeezy noise....
Is that usual ?

[roycehart]

What if you don't have a torque wrench question??

[wickedlokz]

Auto zone told me to torque them to 12 pounds but you said 81 lol

[adampeterson]

Dude, remove your video on sway bar link replacement!! For every time someone takes your advice jacking up vehicle to remove tire you should owe them an hours labor

[elcompatony]

What could happen if I replaced my 01 Swarbrick links for a 99 which are shorter but will work?