How to Replace Front Sway Bar Link 2011-2016 Hyundai Elantra

Buy Now!

This video shows you how to install a front sway bar link on your 2011-2016 Hyundai Elantra. Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle.

This process should be similar on the following vehicles:
2011 Hyundai Elantra
2012 Hyundai Elantra
2013 Hyundai Elantra
2014 Hyundai Elantra
2015 Hyundai Elantra
2016 Hyundai Elantra

Tools you will need:
• 16mm Wrench
• 3/8 Inch Breaker Bar

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[PeacebyJesus]

Thanks. Mechanic here wanted $250 to do this on a 2012 Accent. But evidently this job requires 16, 17, 18 and 19 millimeter wrenches, besides the 21mm lug wrench. since you used all of these sizes.

[TEKMOTION]

Thanks for the video. Since it is a Sway Bar, I need to get both sides in the air at the same time. Oh Boy !

[oldlittlebluejeans]

Do you need to do alignment after replace both sway bar link?

[thehegt]

Why your sway bar link doesn’t need to jack up the wheel Knuckle to take it off , my I have to jack it up a little bit otherwise the link nut won’t come loose

[chasethegreatpalmer]

Good job! looks really simple, is this the same part for 2016 hyundai sonata?

[Johnsmith-yvtx]

if the sway bar link is bend inward would that cause the whole wheel and tire looks bend outward where my outer tire edge is grinding on the road and the tire will have used up edge? or is it the whole wheel and hub is bend (it was accident on the curb) lower control arm and inner rod replaced already.

[danieldelosreyes]

Lo unico que yo mire fue puro oxido👎 las concecuencias de vivir cerca de la playa