Vapor Block from Design Engineering, Inc.

Vapor Block™ solves the problem of fuel and other fluids boiling from extreme heat and causing a vapor lock situation.

Prevent rough idling and difficult starting caused by vapor lock with DEI Vapor Block™. Vapor Block™ fuel line sleeve was specifically developed to prevent vapor lock in fuel systems by greatly reducing heat in the line to keep fuel cooler and below boiling. Vapor Block™ installs easily with a split design and adhesive flap. There is no need to disconnect the fuel line to install. Simply wrap Vapor Block™ around the line, remove the adhesive liner and press the adhesive flap into place.

Made of glass fiber and polyester laminated to an aluminum outer layer, Vapor Block™ offers excellent long lasting thermal protection without paying for expensive repairs or modifications.

• 3 diameters available: 3/8", 5/8" and 1 x 36"
• Split design with adhesive flap
• Use on fuel lines, brake lines & transmission lines to prevent vapor lock
• Can be used on any cable, hose or line for added heat protection
• Easy to cut to size

[david]

I just ordered some of this. Going to give this a try

[jeepsblackpowderandlights]

Going to try this stuff im having major vapor lock on my engine the metal lines are boiled fuel .. i pulled the rubber off the metal line and heard it boiling..and ive broken down 4 times now. Exhaust pipe is right along the entire fuel line to the tank.

Hope this works