3 WAYS TO FIX HDMI INPUT 'NO SIGNAL' PROBLEMS, TROUBLESHOOT GUIDE

1 check cable cord and HDMI devices to TV for a bad connection by wiggling the cable to check if "no signal" changes to a picture
2 reset HDMI devices and TV by unplugging power for 30 seconds or updating firmware which will fix memory corruption
3 if you narrowed the problem to TV main board then replace it or fix the main board, watch these videos below for BEST HDMI repair

* I offer free tech support only for my subscribers and followers

* When working on electronics act at your own risk, follow your electronics safety manual and / or NEC safety codes

*Some of these products I buy myself and some I receive to create a Howto guide and review for companies but I DON'T get $$$ for product reviews.

Thanks for watching and your support!

[XxXDreamSeekerXxX]

Thank you!!! Input 2 wasn't working on my TV and a hard reset fixed it!

[ceasersherniateddisk]

thank you for pointing out the idea of doing a hard reset. I was getting frustrated and the idea didnt even cross my mind. once again, thank you

[nealnc]

Man, you just saved me a crap load of money. The hdmi port just quit for some reason, I unplugged the tv, waited about a minute and now it works!!

[limebulls]

Where can I find the hdmi chip for a Sony VPL VW270ES? Can’t find the chip neither a replacement board

[Piquitogaming]

Thanks man I was so bummed when it stopped working. did the hard reset and now worked you are a God send

[tcong]

Thanks so much! I pursued the baking route, reinstalled, and hdmi ports back working. Super!

[byndeecutts]

Thanks! Unplugged the TV and that did the trick!

[julied]

No signal. Then I reboot it. Tv keeps flashing with the picture. Then it goes back to no signal🤔

[PRUGE]

Thank you. I had no signal. But now All of my ports are working now.

[dgmenace]

Thanks so much for this video....I have a LG 3D LED tv that's aprx 10yrs old now and they still sell for $1500+. The main boards are extremely hard to find. I'm going to try this on one or all the boards I have to try to get this tv working again. The picture is better on it than my 55" LED tv that's less than a year old. You may have helped me revive my 3D tv again! Thanks again

[marielbuitron.robins]

Thank you so much I did the hard reset and it work perfectly!

[danieldelgado]

thanks so much ; I was already getting in the mindset to sober into my dvr security system's cdmi plug - fortunately it worked after I unplugged it - and waited (as u suggested) what a relief - because I destroy everything, not really but kinda true ; u saved the day - again thanks :)

[mohammadal-ghamdi]

For once a video that helps I’m liking this

[DjSkyvos]

All i had to do was to drag out the power kables for 30 sec, Thanks man u saved my day

[seannielsen]

Thank you!!! We did a firmware update could not get the HDMI to reset on our Samsung 8000 series built in 2013 and now it works great. thank you for your help.

[MASTERSTJOHN]

You mentioned you new a repairman that had advanced equipment for board troubleshooting but we didn't see the link post at the end of this video. Could you post that link please? Thanks.

[jessicamccubbin]

THANK YOU!!! The hard reset worked! You're the best

[charlesmarques]

Thanks for the heads up. I've been doing research for a HDMI signal problem on Mistubishi 65 inch dlp. It loses the signal and I have to exit and reselect HDMI input. After signal loss sometimes the HDMI input is not visible when attempting to reselect, only AV selection is shows on screen. You need to make repeated attempts before HDMI shows on screen. I know 2 owners who experience the same problem.

[cjhardknocks]

this is the video i've been waiting for... thank you VERY

[snailmailva]

Thank you for help .Did hard reset, got HDMI back