Day 5 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

preview_player
Показать описание


SUPPORT KEVIN'S TUTORIALS

TOP FUSION 360 PLAYLISTS

SUBSCRIBE (& Hit the Bell!)

TIMESTAMPS
00:00 - Day 5 Model an Ice Cube Tray in Autodesk Fusion 360
00:36 - Sketch the overall shape with a rectangle
01:21 - Create New Sketch on Planar Surface in Fusion 360
02:38 - How to Extrude Cut in Autodesk Fusion 360
03:29 - Add Taper Angle to Extrude in Fusion 360
04:19 - How to use Rectangular Pattern in Fusion 360
05:54 - How to Shell with more than one Face in Fusion 360
07:10 - Create a Midplane Construction Plane in Fusion 360
07:37 - Sketch the Lip of the Ice Cube Tray in Fusion 360
08:46 - Sweep the Lip of the Ice Cube Tray in Fusion 360
09:23 - Next Lesson in this course


Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.

#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk
Рекомендации по теме
Комментарии
Автор

(I'll update this playlists as each Day is released)

ProductDesignOnline
Автор

Done! I'm doing 2-3 lessons per day, hope I can keep the pace. thanks for the great videos

MakerFabio
Автор

Thanks! These lessons have been awesome. I slow the video down because it’s easier for me to learn, so essentially it sounds like a drunk guy is explaining fusion 360, but I actually care what I hear.

schawn
Автор

Every single video I watch I learn something new. After 5 years of graduation I didn't know how to start a simple sketch. Now after watching your videos I'm confident enough to make anything at fusion 360 and keep up with my career. God bless you

ALStudioD
Автор

I'd just like to say that I think these training videos are some of the best I have ever watched.
They're excellent!

StuBar
Автор

These small project-oriented tutorials are so satisfying and effective.

christopheRocco
Автор

I’m in my 2nd year of using F360, i was using Tinkercad, at first I stumbled around the interface of F360 trying to figure out how to make a simple box, then i started watching YouTube videos. I’ve learned a lot of different processes. But you explanations are supper easy to follow.

victorlawver
Автор

Hi! Thank you for this lesson! Couple of questions:
1. 5:25 - Why 255mm not the 256mm? 300-14-30=256?
2. 6:58 - why does placing the plane only in the middle of the tray ensures that it' connected to the edge in this case? Wouldn't placing it anywhere along the edge give the same result? I understand that middle plane is the easiest way here but anyway?

lbva
Автор

Loving the tutorials, I feel like I'm learning so much! I seem to stumble on the midplane construction here: I am missing the red centerline when I go to sketch on the newly made midplane, which results in the L shape floating away from where it should be. Any idea what I might be doing wrong? 🤔

dot
Автор

I had a hard time getting the sweep to work. I drew the profile, zoomed out with the home, and it wouldn't let me select the face of the edge, just the top and bottom edges of the face of the edge. When I did that, it gave me an error. Turns out that even though I thought I was selecting the mid construction plane, I had not, and my profile sketch wasn't in the right spot. To finally get it to work, I had to click the triangle on the Tray part to open it, click the triangle on Construction to open that, then right click on Plane2 and pick sketch. Then my sketch actually ended up on the midplane. After getting this to work, I was able to select the face of the edge and the sweep worked. Quite frustrating, actually. Figuring this out took longer than doing the rest of the tray. But I finally got it to work. Thanks for the tutorials.

cdsmith
Автор

I’ve been messing with Fusion for a while now, this answered some really basic issues I’ve had that make drawings take way longer than needed. Awesome video!

laumuseka
Автор

Nice course, I enjoy a lot! Today I has some toughness to create the coincidence constraint between sweep sketch and the edge of the tray. I think the issue was that my view was almost towards Front plane but not exactly. Once I changed the view to be 100% perpendicular towards Front plane it worked out.

esko
Автор

Took a few attempts to manage it from start to finish. I don't save it, I just prefer to start again as that is repetition and learning. Making sure 'Join' is selected is pretty important!

Thanks Kevin, another cracking video.

johnfox
Автор

wauw learned a lot with this day 5 and it's a lot to cope but two days ago designed a very simple basket in fusion 360 without sweating. Thanks so much!

hansstraat
Автор

I have to watch first, then repeat as I follow along pausing often, but I am learning and this is making sense. Thanks.

fotomakr
Автор

Thanks a lot for those videos, I'm trying to become a Product designer, and your videos are my first step toward this goal thanks a lot. Amazing content.

jacquetdaniel
Автор

These are so good!! I used to work with solidworks in the past, but it has been a while. The most value I'm getting from these videos are the small little shortcuts that teach me how to use Fusion 360 efficiently, on top of refreshing the concepts of parametric modeling for me.

RJ_Eckie
Автор

One thing you do that most teachers dont, is tell us what keys you punch to help us understand exactly what youre doin..much appreciated! ..thank you..subscribed!

TrustJesus
Автор

Thank you so much for amazing videos on learning fusion in 30 day ! I really appreciate it ❤😘

srinidhikarun
Автор

Another amazing video for us beginners. Me and my future STEM students thank you!

JesseRiley