4 Easy Steps To Refill Laser Toner Cartridges Cheaply And Cleanly

It's incredibly simple to refill your laser toner and save money. I will show you 4 easy steps to do it cheaply and cleanly.

Some cartridges already have a refill opening, some do not. I will show you both ways.

Tags
printer
toner cartridge
refill toner cartridge
refill toner
funnel
save money
cheap
clean
Toner powder
ink bottle
refill hole
Burn tool
tape
Reseal

Also check out our other related videos:
Repair LCD Monitor In 5 Minutes, Works Most of The Time

Easiest & Cheapest Way To Fix an Overheated Laptop In 30 seconds

Plug In USB Device Quickly & Correctly Every Time For All Orientations

Why 3TB disk only 2.7TB & 50% off for the future!

computer storage in the past

Computer Hard Disk Failure, What to do?

Visiting An Unmanned Robotic Telepresence Store

Unbox GoPro Hero4 Black & Connect to Smartphone in 5 Minutes

Buy, Unpack & Use A Gopro Camera in One Hour

[alocin]

Thank you for the instructions and demo. You made it professional video. I liked your upload.

[vfddcv]

yes but what about the chip do i need to change it too?

[HealthyLivng]

I can't find one for my printer in black I have HP HP Color LaserJet Pro MFP M277 Series. Is 123inkjets a good alternative even if a bit more?

[SevenDeMagnus]

Thanks. Can you refill Kyocera laser printers?

God bless.

[wormwood]

Calling it ink instead of toner is confusing some....just for future reference.
Still, so very helpful!!! I've always heard toner replacement was so difficult, so was both surprised and pleased and will definitely try it! Helps the planet too.
Thanks so much!

[catepeterson]

What would be a good brand to use on a Lexmark laser printer?

[adeelpaki]

Please like comment share and subscribe the nicest guy I have ever seen straight talk no extra...

[alimdm]

For getting color print from a regular black toner, can i refill my toner with color powder.. Will it work

[khadem]

I want to buy black powder toner PANTUM M7100DW TL-410X Can you tell me which vendor or website I can buy from

[helios]

How to recognize which type of ink do I need for a specific toner? There are so many brands. And where do I get the ink from? Thank you:)

[blueapple]

won't drilling cause plastic shaving to enter the cartridge and mess it up?

[kursatakyol]

What will you do with the dust in the waste dust container? The most efficient one is to completely remove the toner first, clean the waste dust container and the blades, then close it and fill it.

[ennaceurboubaker]

Does the ink from library works with any printer? (pantum P2000 series)

[stPrinciples]

Are laser toner generally the same for many brands of cartridges?

[milkywayandbeyond]

How do you check which toner will be compatible with your printer?

[rlhagemann]

what the hell was the soldering iron and the drill used for?

[rickramos]

To all of you saying that you are trying to refill your toner with ink...what??!! LOL. Laser printer cartridges do NOT use liquid ink. They use toner, a very fine powder. So saying you're trying to refill your toner with ink doesn't make any sense. Inkjet printers use liquid ink but laser printers are a whole other technology and the cartridges never run dry because toner powder is already dry.

I've used various methods from refilling to buying cheaper aftermarket cartridges and the best thing for me is to purchase similar cartridges for older model printers and just swap out the parts that are different and put in a compatible chip. For example, I own an HP Color LaserJet M476dn that uses cartridges that look nearly identical to the ones used for an older HP Color LaserJet printer I own, a CM2320dn. The only difference between the two sets of cartridges is the plates on either side holding the cartridge together. I place a rubber band around each end so that they don't fall apart and remove the two screws on each side and transfer the end plates of my spent M476dn cartridges over to the body of the CM2320dn cartridges, replace the chip and viola, I got a much cheaper, yet still genuine set of carts for my M476dn. It's obviously a hassle and some people would rather pay more than go through all that but that method works well for me and sure beats paying the ridiculous (almost criminal, imho) $300+ I would have had to pay for new cartridges. Buying the older carts costs me a little over $100 for all four, sometimes cheaper depending on what's being sold on ebay.

Refilling isn't for me...not only is it not true that it's very simple like this video claims but it's ALWAYS very messy and you really shouldn't be breathing in that ultra fine toner powder. It's so fine, it often behaves like liquid inside the container and imagine how much of that stuff that you can't see is in the air and going into your lungs. I got dizzy spells and sometimes felt as if I were going to pass out after refilling and that was with wearing a mask. It's a huge gassle and sealing the holes that you must make is surprisingly difficult. Tape does NOT cut it. You need to weld a piece of plastic over the hole to get a good seal. Tape simply won't work. It's like trying to keep water from spilling with tape. It will get all over the inside of your expensive printer and will discolor your prints. I would stay far away from refilling unless you can find a reputable place like Costco or Office Depot to do it for you.

[edoardo]

don`t you need to empty the waste ink chamber?

[johnbrown]

I thought you were supposed to empty the old stuff out before you put the new toner in???

[flieger]

some cartidges has got a counter. so check for electronic and forget it. . .