Solder Seal Heat Shrink Waterproof Wire Connectors - Review

👇👇 *Click Link Below to Get Yours Today* 👇👇

You Can Join this channel to get access to Perks and Help with Products:

LXNCTORT 150Pcs Yellow Tin Solder Seal Heat Shrink Wire Connectors Butt Splice Wire Waterproof Terminals A.W.G. 12-10 for Automotive,Boat,Marine,Electrical
*About this item*
Products Including: 150Pcs 5.5，Yellow AWG 12-10，4mm-6mm.
Easy Use: Select a suitable size of heat shrink terminal and place it between two wires. Heat it evenly with a heat gun or other heat source to melt the hot melt waterproof adhesive ring at both ends. After the tin solder in the middle melts, it can be convenient and faster connected to the wires at both ends.
Waterproofing Sealing: The hot melt waterproof adhesive ring and heat shrink tubing at both ends can seal both ends, achieving good waterproof and sealing performance, and can be used underwater or outdoors
Applications：Used for wire connections according to the A.W.G.12-10 standard, in automobiles, boats, machinery, electronic products or other products.
As an Amazon Associate I earn from qualifying purchases

This video is protected by copyright law and may not be copied in part or whole for use by other content creators.
#founditonamazon #amazon #amazonfinds

[Gear_Now]

👇👇 *Click Link Below to Get Yours Today* 👇👇

[LuckyTuba-zfvr]

Wow those really work thanks for the video

[mj-lpeb]

The solder on the ones i've used IS supposed to melt into the bare metal wires and apparently also melts at a lower temp than standard solder so that it melts with a heat gun when shrinking the ends

[itsallinyourhead]

if the conductor (in this case the copper wire) doesn't get hot enough to melt the solder itself, it's considered a "cold" solder joint. In other words, when soldering, the conductor is heated up to the point where it melts the solder into it, for proper solder joint. This is according to the IPC 7712 soldering certification manual. These little connectors, really don't create a proper solder joint.

[lloydames]

These are junk and will fail in about a year. Not enough solder, You need a strong mechanical bond before soldering.