HOW TO CHANGE AN ELECTRIC SHOWER - JOB REPORT - Plumbing Tips

preview_player
Показать описание
This video will show you how to change an electric shower for a new one. From turning off the electric supply and water, to removing the old shower, marking and drilling the holes for the new one to commissioning the new electric shower.

*Disclaimer *
You must have a qualified electrician do the electrical connections for you. Do not attempt to do this job yourself if you are not qualified. Plumberparts accepts no liability for any damage that may occur following the viewing of this video.

***VISIT OUR SPONSORS***
Рекомендации по теме
Комментарии
Автор

Excellent video! I was quoted £300 for supply & fit to replace my broken down shower. Watched this and went to screw fix and got a new one for £49 job done.

missionfitnessarmyfit
Автор

VERY IMPORTANT, always make sure you know where the water pipe and electric cable are running before drilling the screw holes.

IPfrequently
Автор

I want to say thank you. I watched this video a few times and actually did it myself. The plumber wanted £120 just to swap over a shower unit. I did it myself feel really accomplished.

TheGlenfiddich
Автор

Thanks this helped a lot when I replaced my old shower with my new one. The water inlet was a bit of a nightmare to get the nut loose but a bit of vinegar and WD40 eventually loosened the bugger! Saved me a lot of money getting someone else to fit this for me!

karleenbergkotte
Автор

Thank you so much for this video.
Never installed an electric shower before.
Now fully operational and working a treat.
It's amazing what you can learn from YouTube ❤

CHH
Автор

I'm so relieved to see someone with charisma making videos like this, so thank you! I'm not sure I could have managed another dull monotonous DIY video in preparation for doing some work in our house!

fraxinus_ash
Автор

Just needed to double check everything over with this video. Looks like it's installed now. Thanks for the guide.

TheMistriBox
Автор

Why am I watching this in work? I'm not even looking to fit a new shower.

Rjamesmusic
Автор

Mate you are my hero, have just fit my first change over new shower with your help, I was scared but did the job perfect, I did watch your video about 5 times lol...have subscribed and liked, top man!! 👍👍👍

robertburgess
Автор

00:04:35 is where there is an edit at the hardest part. swiveling the elbow and removing the nut and olive when they are completely seized up.

pfxqlqi
Автор

Also worth noting if you get a more powerful shower you may need to uprate the cable. That one however looks like with 6mm or 10mm. Top video man!

zedman
Автор

great video changing my shower tomorrow never done it before but after watching plumberparts i feel confident now many thanks

kevinbeck
Автор

Your videos have been a superb help this month whilst my dad helps me refit my whole bathroom. You are awesome (and hilarious!) :D

Rovanite
Автор

thank you thank you for your tutorial. i have just successfully replaced my old electric shower. yayyyy

JULESBUMSTEAD
Автор

Run the shower on cold for 30second after installing or you can blow the thermal cut out.

kennethmunnoch
Автор

Hi mate, is your meter set to volts ac above 240v scale when you check isolation ( just to confirm thanks)

Carlostype
Автор

Brilliant vid! You are a funny guy, you made learning fun 😂 cheers

barrymason
Автор

Morning James. Love your videos. I've just fitted a new square MK shower pull switch. All is working ok. The red light shows brightly when on. But the red light still glows rather dim when I turn it off. Is that normal? I have turned it off at the consumer board. Please help mate.
Dave.

davesmith
Автор

what happens to the water that fall on top of the shower unit. Do you need to put silicone around the casing of the shower that meets the wall?

rajibear
Автор

Came for the knowledge ... Stayed and subscribed for the amazing energy and funnies ! Good stuff

thomasjones