How to install solid tire in 1 min on Xiaomi electric scooter

A simple and quick way to change a solid tire on scooter like Xiaomi m356

[PatricSjoeoe]

Ok, now I only need to build more muscles in a year or two before 😂

[YSHIMITSU]

It’s dangerous to use grease or oily stuff. In case of a emergency break the tire can slipped and turn on the wheel. Better use Dish Soap full washable and not slippery. And you can do the tire in the oven by 50celsius for 5-7min than you can stretch it easier. 👍🏻

[rickc]

petroleum based lubes could degrade/breakdown tire material, also temporarily reduce grip on road. best to use soapy water solution.

[robertcook]

Thanks for the bench vice idea! I still had to use three large flatblade screwdrivers to pry it on, and soapy water to lube it, and a rubber mallet to seat it. Advice for others: use a copper face on your vice jaws to avoid buggering the axle flats.

[edvardsz]

My method was - held the tire in hottest my faucet can get for 5 minutes and then solidered it on using brute force and a help of screwdriver leverage. No lube or anything. Got it done in 5-10 mins.

[anilmacwan]

Don't use a lubricant like this. The tire can slip when breaking and it will use more battery energy as the tire slips around the wheel.

[hixty]

Forgot to mention that you need to boil the tyre!

[MrRicaniga]

Made it seem so easy without the tire being in hot water 🤣🤣

[SCHUMACHEROID]

Whats the spray you are using ? If WD40 I think it could be dangerous... but looks like very easy and fast. Anyway I prefer to heat tire ...

[gigabane]

stuff that. pair of gloves, drop tyre in boiled water for a bit, then use one one of those very mild spray glues that are actually quite slippy when wet. Then just wipe the excess with a mild solvent. good until you need to replace.

[MohdSalman-dueo]

Could you please make a video or give some details on how to replace the tube for the rear tire on mi 4 lite 2nd gen . I find it very difficult to disassemble the rear tire

[RodrigoSilva-iyks]

I just spent 3 hours and almost took out a finger trying to do this. Bro has the strenght of Odin

[hannesdobbelaere]

THANK YOU! you just spared me from a few hours of swearing and cussing! :-D

[jboyce]

they have rims split down the middle, so you just set either side into the tire well and work the bolts down in like a 2-5, 10-7 pattern on a clock to suck it tight together. Much easier.

[TrappedInTheVoid.]

Ok so my instructions say to boil the wheel at 100° for 20min, do I need to do that so it can be more stretchy?

[matthew]

Where is the rest of the scooter? How do you disconnect the wire? How do you put it in a vice without crushing the threads on the hub?
So many questions!

[BoneStar]

How is it all these poxy youtubers think everyday normal people have these tools by the toaster in the kitchen ?

[rgeniec]

I microwaved the tire. Boiling water didn’t work as well. ✌️

[posterizer]

This MF gotta hit gym at least 5 times every minute damn it took 3 of my mates and I to struggle one of those on

[rafaeladamovic]

can i sprey wd40 on tire end motor to put tire on esier