Most common Miele tumble dryer Error / fault / failure / fehler codes. Trockner.

Thanks to Meile appliances having a pretty smart self-diagnosis system, one quick check of your display panel should tell you what kind of problem you’re experiencing.

Unfortunately, you’ll need a tumble dryer repair expert to handle most Miele tumble dryer errors. A quick clear of the filter to make sure there’s not been a build-up of lint is usually all of the DIY maintenance you can or should perform on these appliances.

When you’re faced with an error, there’s no need to go digging around to find your old appliance manual though. Here you’ll find all Miele tumble dryer fault codes in a handy list format:

F1 – NTC heater sensor short-circuited
F2 – NTC heater sensor open circuit
F3 – NTC fan sensor short-circuited
F4 – NTC fan sensor open circuit
F32 – Door lock doesn’t close
F33 – Door lock doesn’t open
F36 – Door switch defective
F39 – Electronic unit fault
F41 – Faulty EEPROM
F45 – Flash ram defect.
F46 – LCD connection defective.
F55 – Laundry isn’t dry after 180 minutes
F66 – Airpath leak